Alloy 250 (UNS K92890 / Maraging 250) is an age-hardenable iron-nickel steel. Alloy 250 combines ultra-high strength (1800MPa), good toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation. C250 is used for missile and ejector systems, slat tracks and drive shafts.

Specifications

• UNS K92890
• AMS 6512 Bar and Forging Stock
• Werkstoff Nr. 1.6359
• MIL-S-46850
• BS S162
• DTD 5212
• MSRR 6551
• MAT 102
• MIA 101
• Udimar 250
• Vascomax C250

Maraging 300 is an age hardenable (maraging) iron nickel stainless steel. Maraging 300 has exceptional strength, toughness and is resistant to crack propagation. Maraging 300 is used for tooling, transmission shafts, autosport components and light aircraft landing gear.

Specifications

• UNS K93120
• ASTM A579
• SAE AMS 6514 and AMS 6521 (UNS K93160)
• MIL S 46850, MIL S 13881
• Werkstoff Nr. 1.6358 and 1.6354
• Also known as Type 300, Maraging 300, C300
• Vdimor 300
• Vascomax C300

Maraging 350 is a nickel maraging steel which contains Cobalt as the primary strengthening agent. Maraging 350 has excellent mechanical properties, workability and heat treatment characteristics. Maraging 350 is used for missile and rocket motor cases, landing and takeoff gear components, high performance shafting, gears and fasteners.

Specifications

• MIL-S-46850
• AMS 6515
• Trade name's: Maraging 350, Vascomax C350™

Monel Alloy 400 round bars UNS N04400 EN 2.4360 contain Copper 28-34%, Manganese 2.0% max, Nickel 63%, Silicon 0.5% which is commonly used in various daily applications such as Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs. Alloy 400 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy 400 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy 400 round bars along in types of Monel Alloy 400 bright round bars, Monel Alloy 400 hexagonal bars, Monel Alloy 400 square bars, Monel Alloy 400 hex bars, Monel Alloy 400 flat bars, Monel Alloy 400 threaded bars and Monel Alloy 400 forged bars. All the Monel Alloy 400 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Monel Alloy 400 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Monel Alloy 400 bars we stock:

• Monel Alloy 400 cold drawn & polished round, hex, square, threaded, forged bars
• Monel Alloy 400 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Monel Alloy 400 peeled and turned round, hex, square, threaded, forged bars
• Monel Alloy 400 buffed round, hex, square, threaded, forged bars
• Monel Alloy 400 chamfered round, hex, square, threaded, forged bars
• Monel Alloy 400 solution annealed round, hex, square, threaded, forged bars
• Monel Alloy 400 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Monel Alloy 400 round bars:
Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs..

Monel Alloy K500 round bars UNS S05500 WR. NO 2.4375 contain Titanium 0.35-0.85%, Manganese 1.5% max, Nickel 63.0-70.0%, Silicon 0.50% max, Carbon 0.25% max, Aluminium 2.30-3.15% which is commonly used in various daily applications such as Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Monel Alloy K500 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy K500 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy K500 round bars along in types of Monel Alloy K500 bright round bars, Monel Alloy K500 hexagonal bars, Monel Alloy K500 square bars, Monel Alloy K500 hex bars, Monel Alloy K500 flat bars, Monel Alloy K500 threaded bars and Monel Alloy K500 forged bars. All the Monel Alloy K500 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Monel Alloy K500 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Monel Alloy K500 bars we stock:

• Monel Alloy K500 cold drawn & polished round, hex, square, threaded, forged bars
• Monel Alloy K500 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Monel Alloy K500 peeled and turned round, hex, square, threaded, forged bars
• Monel Alloy K500 buffed round, hex, square, threaded, forged bars
• Monel Alloy K500 chamfered round, hex, square, threaded, forged bars
• Monel Alloy K500 solution annealed round, hex, square, threaded, forged bars
• Monel Alloy K500 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Monel Alloy K500 round bars:
Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service.

Mumetal is available in Mumetal wire, Mumetal Round bar, Mumetal Forged bar, Mumetal hex bar, Mumetal Flat bar, Mumetal Circles, Mumetal Ring, Mumetal Tube, Mumetal seamless Pipe, Mumetal Welded / ERW Pipe, Mumetal Sheet, Mumetal Plate, Mumetal Coil, Mumetal Flanges, Mumetal fasteners, Mumetal Socket weld Fittings, Mumetal ferrule fittings, Mumetal Buttweld fittings Like cap, elbow, tee, Reducer.

Mumetal is 80% nickel with additions of iron and molybdenum as main elements in turn this alloy offers an extremely high initial permeability. It is only moderately resistant to moisture and atmospheric corrosion, it used mainly in in transformer cores but is well known for its magnetic properties which are used for shielding electrical components from magnetic fields. "HYMU 80" has a minimum DC permeability of 80,000 at a flux density of 40 gauss when heat treated by the recommended procedure and test in accordance with ASTM 596

Physical Properties (Annealed Condition)

• Coefficient of Thermal Expansion, in./in. °F x 10
• 7.2in/in °F x 10-6 between 70 and 400F
• 13cm/cm/ °C 10-6 between 30 and 204 °C

Specifications

• Permalloy
• HYMU 80
• MAG 7904
• MIL N 14411 C, COMP. 1
• ASTM A753-78 and ASTM 596

At Harsh Steel Nickel Alloy 200/UNS N02200 is available in Nickel Alloy 200 wire, Nickel Alloy 200 Round bar, Nickel Alloy 200 Forged bar, Nickel Alloy 200 hex bar, Nickel Alloy 200 Flat bar, Nickel Alloy 200 Circles, Nickel Alloy 200 Ring, Nickel Alloy 200 Tube, Nickel Alloy 200 seamless Pipe, Nickel Alloy 200 Welded / ERW Pipe, Nickel Alloy 200 Sheet, Nickel Alloy 200 Plate, Nickel Alloy 200 Coil, Nickel Alloy 200 Flanges, Nickel Alloy 200 fasteners, Nickel Alloy 200 Socket weld Fittings, Nickel Alloy 200 ferrule fittings, Nickel Alloy 200 Buttweld fittings Like cap, elbow, tee, Reducer.

Nickel Alloy 200 and Nickel Alloy 201 is solid solution strengthened, in a commercial sense pure wrought materials together with good mechanized properties in excess of a variety of temperature ranges and superb level of resistance to a lot of corrosives, specifically hydroxides. Nickel Alloy 201 ended up being a modification of 200 to overpower carbon and (. 02 max) which keeps this coming from becoming embrittled through intergranular precipitates at temperature ranges of 600° F to 1400° F in lots of procedures. Normally, your essential constraints of both equally, nickel 200 and nickel 201, are usually blended into just one, dual-certified chemistry resulting providing a one metal while using desired attributes of both equally precious metals, Nickel Alloy 200/201.

Nickel Alloy 200 and 201 deliver corrosion amount of resistance within lowering and simple advertising together with within oxidizing atmospheres provided that the actual oxidizing advertising makes it possible for the actual formation of a passive oxide film. This oxide film makes up about the actual components exceptional amount of resistance within caustic environments. Deterioration prices within both equally marine and rural atmospheres are incredibly low. The amount of resistance connected with Nickel Alloy 200 and 201 to be able to corrosion by distilled and normal seas is very useful. And yes it likewise offers exceptional support within going sea water actually at excessive pace, but in at standstill as well as very low-velocity sea water severe local episode may occur beneath fouling microorganisms as well as different remains. Within warm water devices in which the water is made up of fractional carbon and atmosphere using some size, corrosion prices will probably be at first excessive however will minimize eventually when conditions favor the actual formation of a protective film.

Nickel Alloy 200 is generally on a support at temps below 600° F. At increased temps Nickel Alloy 200 merchandise may have problems with graphitization which can result in severely compromised properties. Whenever functioning temps are hoped for to be able to exceed 600° F, carbon written content gets to be critical. The lower carbon written content connected with Nickel Alloy 201 tends to make the actual materials repellent to be able to graphitization and as a consequence fewer at the mercy of embrittlement. Nickel Alloy 200/201 are generally accepted with regard to structure connected with strain wrecks and elements beneath ASME Boiler and Pressure . Nickel Alloy 200 is usually accepted with regard to support up to 600° F though Nickel Alloy 201 is usually accepted with regard to support up to 1230° F. Reduction point is usually 2615-2635° F.

In what forms is Nickel Alloy 200/201 available at Harsh Steel?

• Nickel Alloy 200 Sheet
• Nickel Alloy 200 Plate
• Nickel Alloy 200 Bar
• Nickel Alloy 200 Pipe & Tube (welded & seamless)
• Nickel Alloy 200 Fittings (i.e. flanges, slip-ons, blinds, weld necks, lapjoints, long welding necks,socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Nickel Alloy 200 Wire

What are the characteristics of Nickel Alloy 200/201?
Highly resistant to various reducing chemicals

• Excellent resistance to caustic alkalies
• High electrical conductivity
• Excellent corrosion resistance to distilled and natural waters
• Resistance to neutral and alkaline salt solutions
• Excellent resistance to dry fluorine
• Widely used to handle caustic soda
• Good thermal, electrical and magnetostrictive properties
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations

At Harsh Steel Nickel Alloy 201 (UNS N02201) is available in Nickel Alloy 201 wire, Nickel Alloy 201 Round bar, Nickel Alloy 201 Forged bar, Nickel Alloy 201 hex bar, Nickel Alloy 201 Flat bar, Nickel Alloy 201 Circles, Nickel Alloy 201 Ring, Nickel Alloy 201 Tube, Nickel Alloy 201 seamless Pipe, Nickel Alloy 201 Welded / ERW Pipe, Nickel Alloy 201 Sheet, Nickel Alloy 201 Plate, Nickel Alloy 201 Coil, Nickel Alloy 201 Flanges, Nickel Alloy 201 fasteners, Nickel Alloy 201 Socket weld Fittings, Nickel Alloy 201 ferrule fittings, Nickel Alloy 201 Buttweld fittings Like cap, elbow, tee, Reducer.

Nickel Alloy 200 and Nickel Alloy 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel Alloy 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel Alloy 200/201.

Nickel Alloy 200 and 201 deliver corrosion amount of resistance within lowering and simple advertising together with within oxidizing atmospheres provided that the actual oxidizing advertising makes it possible for the actual formation of a passive oxide film. This oxide film makes up about the actual components exceptional amount of resistance within caustic environments. Deterioration prices within both equally marine and rural atmospheres are incredibly low. The amount of resistance connected with Nickel Alloy 200 and 201 to be able to corrosion by distilled and normal seas is very useful. And yes it likewise offers exceptional support within going sea water actually at excessive pace, but in at standstill as well as very low-velocity sea water severe local episode may occur beneath fouling microorganisms as well as different remains. Within warm water devices in which the water is made up of fractional carbon and atmosphere using some size, corrosion prices will probably be at first excessive however will minimize eventually when conditions favor the actual formation of a protective film.

Nickel Alloy 200 hundred is generally on a support at temps below 600° F. At increased temps Nickel Alloy 200 hundred merchandise may have problems with graphitization which can result in severely compromised properties. Whenever functioning temps are hoped for to be able to exceed 600° F, carbon written content gets to be critical. The lower carbon written content connected with Nickel Alloy 201 tends to make the actual materials repellent to be able to graphitization and as a consequence fewer at the mercy of embrittlement. Nickel Alloy 200/201 are generally accepted with regard to structure connected with strain wrecks and elements beneath ASME Boiler and Pressure . Nickel Alloy 200 is usually accepted with regard to support up to 600° F though Nickel Alloy 201 is usually accepted with regard to support up to 1230° F. Reduction point is usually 2615-2635° F.

Nickel Alloy-201 (UNS N02201) is a commercially pure wrought nickel, with good mechanical properties and an excellent resistance to many corrosives. Nickel Alloy 201 has low carbon (0.02% max) for applications over 315°C it is mainly used for food processing equipment, chemical shipping drums, caustic handling equipment and piping, electronic parts, aerospace and missile components, rocket motor cases, magnetostrictive devices.

In what forms is Nickel Alloy 200/201 available at Harsh Steel?

• Nickel Alloy 201 Sheet
• Nickel Alloy 201 Plate
• Nickel Alloy 201 Bar
• Nickel Alloy 201 Pipe & Tube (welded & seamless)
• Nickel Alloy 201 Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks,socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Nickel Alloy 201 Wire

What are the characteristics of Nickel Alloy 200/201?

• Highly resistant to various reducing chemicals
• Excellent resistance to caustic alkalies
• High electrical conductivity
• Excellent corrosion resistance to distilled and natural waters
• Resistance to neutral and alkaline salt solutions
• Excellent resistance to dry fluorine
• Widely used to handle caustic soda
• Good thermal, electrical and magnetostrictive properties
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations

At Harsh Steel Nickel 263 is available in Nimonic 263 wire, Nimonic 263 Round bar, Nimonic 263 Forged bar, Nimonic 263 hex bar, Nimonic 263 Flat bar, Nimonic 263 Circles, Nimonic 263 Ring, Nimonic 263 Tube, Nimonic 263 seamless Pipe, Nimonic 263 Welded / ERW Pipe, Nimonic 263 Sheet, Nimonic 263 Plate, Nimonic 263 Coil, Nimonic 263 Flanges, Nimonic 263 fasteners, Nimonic 263 Socket weld Fittings, Nimonic 263 ferrule fittings, Nimonic 263 Buttweld fittings Like cap, elbow, tee, Reducer.

Nimonic alloy 263 is an age-hardenable nickel-cobalt-chrome-molybdenum alloy which was designed to have excellent fabrication characteristics in the annealed condition but also very good aged strength properties. Alloy 263 is easier to form or weld than other materials such as Waspaloy or Rene 41 and exhibits excellent intermediate temperature ductility. Alloy 263 is supplied in the annealed condition and its excellent ductility in this condition makes it suitable for cold forming as well as hot working. Alloy 263 can be welded using matching composition filler wire in both TIG and MIG forms. The recommended heat treatments for Nimonic 263 are as follows:

Specifications

• UNS N07263
• Werkstoff Nr. 2.4650
• BS HR10 Rod and Bar
• BS HR 206 Plate, Sheet, Strip
• BS HR 404 Seamless Tube
• AECMA PrEn 2199 Bar
• AECMA PrEn 2200 Forgings
• AECMA PrEn 2201 Bar
• AECMA PrEn 2202 Tube
• AECMA PrEn 2203 Sheet, Strip
• AECMA PrEn 2418 Plate
• DIN 17750 Plate, Sheet, Strip
• DIN 17751 Pipe and Tube
• DIN 17752 Bar and Rod
• DIN 17753 Wire
• DIN 17754 Forgings
• AMS 5872 Sheet, Plate and Strip
• AMS 5886 Bar, Forgings, Rings
• AFNOR NCK 20 D
• AIR 9165 Sheet, Plate, Rod, Bar and Forgings
• MSRR 7035
• MSRR 7036
• GE B50A774A

Nimonic Alloy 75 round bars UNS S06075 WR. NO 2.4951 contain Chromium 18.00-21.00% Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.5% max, titanium 02-06% which is commonly used in various daily applications such as sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering. Nimonic Alloy 75 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 75 round bars along in types of Nimonic Alloy 75 bright round bars, Nimonic Alloy 75 hexagonal bars, Nimonic Alloy 75 square bars, Nimonic Alloy 75 hex bars, Nimonic Alloy 75 flat bars, Nimonic Alloy 75 threaded bars and Nimonic Alloy 75 forged bars. All the Nimonic Alloy 75 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 75 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Nimonic Alloy 75 bars we stock:

• Nimonic Alloy 75 cold drawn & polished round, hex, square, threaded, forged bars
• Nimonic Alloy 75 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Nimonic Alloy 75 peeled and turned round, hex, square, threaded, forged bars
• Nimonic Alloy 75 buffed round, hex, square, threaded, forged bars
• Nimonic Alloy 75 chamfered round, hex, square, threaded, forged bars
• Nimonic Alloy 75 solution annealed round, hex, square, threaded, forged bars
• Nimonic Alloy 75 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Nimonic Alloy 75 round bars:
Sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.

At Harsh Steel Nickel 80A is available in Nimonic 80A wire, Nimonic 80A Round bar, Nimonic 80A Forged bar, Nimonic 80A hex bar, Nimonic 80A Flat bar, Nimonic 80A Circles, Nimonic 80A Ring, Nimonic 80A Tube, Nimonic 80A seamless Pipe, Nimonic 80A Welded / ERW Pipe, Nimonic 80A Sheet, Nimonic 80A Plate, Nimonic 80A Coil, Nimonic 80A Flanges, Nimonic 80A fasteners, Nimonic 80A Socket weld Fittings, Nimonic 80A ferrule fittings, Nimonic 80A Buttweld fittings Like cap, elbow, tee, Reducer.

Alloy 80A (Nimonic alloy 80A) is a wrought, age-hardenable nickel-chromium alloy. Alloy 80A is similar toalloy 75 but made precipitation hardenable by additions of aluminium and titanium. Alloy 80A has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 815ºC (1500ºF). Vacuum refined versions are also available. Alloy 80A is used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines and has many other offshore/marine, automotive and electrical applications.

Nimonic Alloy 90 round bars UNS S07090 WR. NO 2.4632 contain Chromium 18.00-21.00%, Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.2% max, Zirconium0.15% maximum which is commonly used in various daily applications such as turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs. Nimonic Alloy 90 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 90 round bars along in types of Nimonic Alloy 90 bright round bars, Nimonic Alloy 90 hexagonal bars, Nimonic Alloy 90 square bars, Nimonic Alloy 90 hex bars, Nimonic Alloy 90 flat bars, Nimonic Alloy 90 threaded bars and Nimonic Alloy 90 forged bars. All the Nimonic Alloy 90 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 90 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Nimonic Alloy 90 bars we stock:

• Nimonic Alloy 90 cold drawn & polished round, hex, square, threaded, forged bars
• Nimonic Alloy 90 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Nimonic Alloy 90 peeled and turned round, hex, square, threaded, forged bars
• Nimonic Alloy 90 buffed round, hex, square, threaded, forged bars
• Nimonic Alloy 90 chamfered round, hex, square, threaded, forged bars
• Nimonic Alloy 90 solution annealed round, hex, square, threaded, forged bars
• Nimonic Alloy 90 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Nimonic Alloy 90 round bars:
Turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs.

Tantalum round bars UNS R05200/R05252 which is commonly used making electronic components, nuclear reactors, chemical equipment, semiconductors, heat exchangers and for radiation shielding. Tantalum alloy can easily worked out in room temperature. Tantalum bars are available in ASTM A-801 and AMS A-47182 specifications. We Export and Stock Tantalum round bars along in types of Tantalum bright round bars, Tantalum hexagonal bars, Tantalum square bars Tantalum hex bars, Tantalum flat bars, Tantalum threaded bars and Tantalum forged bars. All the Tantalum bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Tantalum rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Tantalum bars we stock:

• Tantalum round bars solution annealed round, hex, square, threaded, forged bars
• Tantalum round bars forged round, hex, square, threaded forged bars with annealed and aged condition.

Application of Tantalum round bars:
Making electronic components, nuclear reactors, chemical equipment, semiconductors, heat exchangers and for radiation shielding.

Waspaloy is available in Waspaloy wire, Waspaloy Round bar, Waspaloy Forged bar, Waspaloy hex bar, Waspaloy Flat bar, Waspaloy Circles, Waspaloy Ring, Waspaloy Tube, Waspaloy seamless Pipe, Waspaloy Welded / ERW Pipe, Waspaloy Sheet, Waspaloy Plate, Waspaloy Coil, Waspaloy Flanges, Waspaloy fasteners, Waspaloy Socket weld Fittings, Waspaloy ferrule fittings, Waspaloy Buttweld fittings Like cap, elbow, tee, Reducer

WASPALOY is a nickel based age hardenable alloy that possesses high temperature strength while still having a good corrosion resistance, especially to oxidation. WASPALOY can be used at temperatures up to 650°C (1200°F) which is critical rotating applications. WASPALOY is used in gas turbine engine components, missile systems, shafts, spacers, seals, rings, casings, fasteners and many other uses in engine hardware, airframe assemblies.

Properties as per AMS 5544. Heat Treatment is as follows:
Annealing 1975°F / 30 mins and Air Cool
Solution Heat Treatment 1825°F / 2hrs and Air Cool
Stabilization Heat Treatment 1550°F /4hrs and Air Cool
Precipitation Heat Treatment 1400°F / 16 hrs and Air Cool

Waspaloy Bar Properties

• Properties as per AMS 5708 type 2 (capable of AMS 5709) Heat Treatment is as follows
• Solution Treat 1900 - 1975°F / 1-4 hours and Air Cool
• Resulting hardness not higher than 302HB
• Stabilization Heat Treatment Heat to 1550°F / 4 hrs and Air Cool
• Precipitaion Heat Treatment Heat to 1400°F / 16 hrs and Air Cool
• Resulting hardness 32-42 HRC

Specifications

• Waspaloy Rod, Bar, Wire and Forging Stock
• ASTM B 637, ISO 9723, ISO 9724, ISO 9725, AMS 5704, AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828, MAM 5706, AECMA PrEN 2193, AECMA PrEN 2194, AECMA PrEN 2406, AECMA PrEN 2958, AECMA PrEN 2959, AECMA PrEN 2960, AECMA PrEN 3220.
• Waspaloy Plate, Sheet and Strip
• AMS 5544, AECMA PrEN 2195
• Waspaloy Other
• UNS N07001, W. Nr 2.4654.