Invar 36


Invar 36

Specifications

Thickness of Invar 36 Bars 3mm Up to 600mm
Length of Invar 36 Bars 2mm to 6000mm
Tolerance of Invar 36 Bars h8, H9, H10, H11, K12, Din 1013, A484, Grit 240 & 320
Carbon (C) 0.10 max%
Manganese (Mn) 0.06 max%
Silicon (Si) 0.35 max%
Nickel (Ni) 35 - 38%
Sulfur (S) 0.025 max%
Iron (Fe) Balance%
Chromium (Cr) 0.50 max%
Molybdenum (MO) 0.50 max%
Niobium (Nb) 2.5 - 4.5%
Cobalt (Co) 1.0 max%

Invar 36 round bars UNS K93600 EN 1.3912 contain Chromium 0.50% min, Manganese 0.06% min, Nickel 35-38%, Silicon 0.35% minimum which is commonly used in various daily applications such as Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals. Invar 36 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Invar 36 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Invar 36 round bars along in types of Invar 36 bright round bars, Invar 36 hexagonal bars, Invar 36 square bars, Invar 36 hex bars, Invar 36 flat bars, Invar 36 threaded bars and Invar 36 forged bars. All the Invar 36 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Invar 36 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Invar 36 bars we stock:

  • Invar 36 cold drawn & polished round, hex, square, threaded, forged bars
  • Invar 36 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Invar 36 peeled and turned round, hex, square, threaded, forged bars
  • Invar 36 buffed round, hex, square, threaded, forged bars
  • Invar 36 chamfered round, hex, square, threaded, forged bars
  • Invar 36 solution annealed round, hex, square, threaded, forged bars
  • Invar 36 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Invar 36 round bars:
Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals..


Yes! I am interested

Submit Your Requirement


  • Explore More Products




Looking for "Invar 36" ?