Monel K500

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Monel Alloy K500 round bars UNS S05500 WR. NO 2.4375 contain Titanium 0.35-0.85%, Manganese 1.5% max, Nickel 63.0-70.0%, Silicon 0.50% max, Carbon 0.25% max, Aluminium 2.30-3.15% which is commonly used in various daily applications such as Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Monel Alloy K500 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy K500 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy K500 round bars along in types of Monel Alloy K500 bright round bars, Monel Alloy K500 hexagonal bars, Monel Alloy K500 square bars, Monel Alloy K500 hex bars, Monel Alloy K500 flat bars, Monel Alloy K500 threaded bars and Monel Alloy K500 forged bars. All the Monel Alloy K500 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Monel Alloy K500 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Monel Alloy K500 bars we stock:

  • Monel Alloy K500 cold drawn & polished round, hex, square, threaded, forged bars
  • Monel Alloy K500 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Monel Alloy K500 peeled and turned round, hex, square, threaded, forged bars
  • Monel Alloy K500 buffed round, hex, square, threaded, forged bars
  • Monel Alloy K500 chamfered round, hex, square, threaded, forged bars
  • Monel Alloy K500 solution annealed round, hex, square, threaded, forged bars
  • Monel Alloy K500 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Monel Alloy K500 round bars:
Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service.


Specifications

Thickness of Alloy K500 Bars 3mm Up to 600mm
Length of Alloy K500 Bars 2mm to 6000mm
Tolerance of Alloy K500 Bars H8, H9, H10, H11, K12, Din 1013, A484, Grit 240 & 320
Carbon (C) 0.25 max
Manganese (Mn) 1.50 max
Silicon (Si) 0.50 max
Nickel (Ni) 63.00 min
Iron (Fe) 2.00 max
Aluminium (Al) 2.30 - 3.15
Copper (Cu) 27.00 - 33.00
Titanium (Ti) 0.35 - 0.85
Sulfur (S) 0.01 max




Looking for Product Name ?