Nimonic 90

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Nimonic Alloy 90 round bars UNS S07090 WR. NO 2.4632 contain Chromium 18.00-21.00%, Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.2% max, Zirconium0.15% maximum which is commonly used in various daily applications such as turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs. Nimonic Alloy 90 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 90 round bars along in types of Nimonic Alloy 90 bright round bars, Nimonic Alloy 90 hexagonal bars, Nimonic Alloy 90 square bars, Nimonic Alloy 90 hex bars, Nimonic Alloy 90 flat bars, Nimonic Alloy 90 threaded bars and Nimonic Alloy 90 forged bars. All the Nimonic Alloy 90 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 90 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Nimonic Alloy 90 bars we stock:

  • Nimonic Alloy 90 cold drawn & polished round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 peeled and turned round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 buffed round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 chamfered round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 solution annealed round, hex, square, threaded, forged bars
  • Nimonic Alloy 90 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Nimonic Alloy 90 round bars:
Turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs.


Specifications

Thickness of 90 bars 3mm up to 600mm
Length of 90 bars 2mm to 6000mm
Tolerance of 90 bars h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320
Carbon (C) 0.2 max
Manganese (Mn) 1.00 max
Silicon (Si) 1.00 max
Chromium (Cr) 18.00 - 21.00
Nickel (Ni) Balance
Iron (Fe) 1.5 max
Titanium (Ti) 2.00 - 3.00
Copper (Cu) 0.2 max
Cobalt (Co) 15.00 - 21.00
Aluminium (Al) 1.00 - 2.00
Boron (B) 0.02 max
Sulfur (S) 0.015 max
Zirconium (Zr) 0.15 max
Lead (Pb) 0.0020 max




Looking for Product Name ?