Nimonic 75

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Nimonic Alloy 75 round bars UNS S06075 WR. NO 2.4951 contain Chromium 18.00-21.00% Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.5% max, titanium 02-06% which is commonly used in various daily applications such as sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering. Nimonic Alloy 75 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 75 round bars along in types of Nimonic Alloy 75 bright round bars, Nimonic Alloy 75 hexagonal bars, Nimonic Alloy 75 square bars, Nimonic Alloy 75 hex bars, Nimonic Alloy 75 flat bars, Nimonic Alloy 75 threaded bars and Nimonic Alloy 75 forged bars. All the Nimonic Alloy 75 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 75 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Nimonic Alloy 75 bars we stock:

  • Nimonic Alloy 75 cold drawn & polished round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 peeled and turned round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 buffed round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 chamfered round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 solution annealed round, hex, square, threaded, forged bars
  • Nimonic Alloy 75 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Nimonic Alloy 75 round bars:
Sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.


Specifications

Thickness of 75 Bars 3mm Up to 600mm
Length of 75 Bars 2mm to 6000mm
Tolerance of 75 Bars H8, H9, H10, H11, K12, Din 1013, A484, Grit 240 & 320
Carbon (C) 0.08 - 0.15%
Manganese (Mn) 1.00 max%
Silicon (Si) 1.00 max%
Chromium (Cr) 18.9 - 21.0%
Nickel (Ni) Balance%
Iron (Fe) 5.0 max%
Titanium (Ti) 0.2 - 0.6%
Copper (Cu) 0.50 max%




Looking for Product Name ?