Alloy A286

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Alloy A286 round bars UNS S66286 EN 1.4980 contain Chromium 13.5-16.0%, Manganese 2.0% max, Nickel 24.0-27.0%, Silicon 1.0% max, Carbon 0.08% max, Aluminium 0.35% maximum which is commonly used in various daily applications such as Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment. Alloy A286 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Alloy A286 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Alloy A286 round bars along in types of Alloy A286 bright round bars, Alloy A286 hexagonal bars, Alloy A286 square bars, Alloy A286 hex bars, Alloy A286 flat bars, Alloy A286 threaded bars and Alloy A286 forged bars. All the Alloy A286 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Alloy A286 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Alloy A286 bars we stock:

  • Alloy A286 cold drawn & polished round, hex, square, threaded, forged bars
  • Alloy A286 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Alloy A286 peeled and turned round, hex, square, threaded, forged bars
  • Alloy A286 buffed round, hex, square, threaded, forged bars
  • Alloy A286 chamfered round, hex, square, threaded, forged bars
  • Alloy A286 solution annealed round, hex, square, threaded, forged bars
  • Alloy A286 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Alloy A286 round bars:
Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment.


Specifications

Thickness of Alloy A286 Bars 3mm Up to 600mm
Length of Alloy A286 Bars 2mm to 6000mm
Tolerance of Alloy A286 Bars H8, H9, H10, H11, K12, Din 1013, A484, Grit 240 & 320
Carbon (C) 0.08 max%
Manganese (Mn) 2.00 max%
Silicon (Si) 1.00 max%
Nickel (Ni) 24.00 - 27.00%
Titanium (Ti) 1.90 - 2.35%
Phosphorous (P) 0.025 max%
Molybdenum (MO) 1.00 - 1.50%
Sulfur (S) 0.025 max%
Chromium (Cr) 13.50 - 16.0013.50 - 16.00%
Vanadium (V) 0.10 - 0.50%
Aluminium (Al) 0.35 max%
Boron (B) 0.0003 - 0.010%
Cobalt (Co) 1.00 max%
Iron (Fe) Balance%




Looking for Product Name ?