Latest Products https://www.nickelalloys.in Latest Products Mon, 28 Jan 2019 15:26:48 +0530 en-us https://www.nickelalloys.in Invar 36 https://www.nickelalloys.in/invar-36.htm https://www.nickelalloys.in/invar-36.htm Mon, 21 Jan 2019 00:00:00 +0530 Invar 36 round bars UNS K93600 EN 1.3912 contain Chromium 0.50% min, Manganese 0.06% min, Nickel 35-38%, Silicon 0.35% minimum which is commonly used in various daily applications such as Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals. Invar 36 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Invar 36 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Invar 36 round bars along in types of Invar 36 bright round bars, Invar 36 hexagonal bars, Invar 36 square bars, Invar 36 hex bars, Invar 36 flat bars, Invar 36 threaded bars and Invar 36 forged bars. All the Invar 36 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Invar 36 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Invar 36 bars we stock: Invar 36 cold drawn & polished round, hex, square, threaded, forged bars Invar 36 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Invar 36 peeled and turned round, hex, square, threaded, forged bars Invar 36 buffed round, hex, square, threaded, forged bars Invar 36 chamfered round, hex, square, threaded, forged bars Invar 36 solution annealed round, hex, square, threaded, forged bars Invar 36 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Invar 36 round bars:Laser Part Applications, Moulds for Composite Aircraft Parts, Precision Condenser Plates Resonant, Cavities for Radars, Special Joints and Washers, Thermostatic Bimetals.. Waspaloy https://www.nickelalloys.in/waspaloy.htm https://www.nickelalloys.in/waspaloy.htm Mon, 21 Jan 2019 00:00:00 +0530 Waspaloy is available in Waspaloy wire, Waspaloy Round bar, Waspaloy Forged bar, Waspaloy hex bar, Waspaloy Flat bar, Waspaloy Circles, Waspaloy Ring, Waspaloy Tube, Waspaloy seamless Pipe, Waspaloy Welded / ERW Pipe, Waspaloy Sheet, Waspaloy Plate, Waspaloy Coil, Waspaloy Flanges, Waspaloy fasteners, Waspaloy Socket weld Fittings, Waspaloy ferrule fittings, Waspaloy Buttweld fittings Like cap, elbow, tee, ReducerWASPALOY is a nickel based age hardenable alloy that possesses high temperature strength while still having a good corrosion resistance, especially to oxidation. WASPALOY can be used at temperatures up to 650°C (1200°F) which is critical rotating applications. WASPALOY is used in gas turbine engine components, missile systems, shafts, spacers, seals, rings, casings, fasteners and many other uses in engine hardware, airframe assemblies.Properties as per AMS 5544. Heat Treatment is as follows:Annealing 1975°F / 30 mins and Air CoolSolution Heat Treatment 1825°F / 2hrs and Air CoolStabilization Heat Treatment 1550°F /4hrs and Air CoolPrecipitation Heat Treatment 1400°F / 16 hrs and Air CoolWaspaloy Bar Properties Properties as per AMS 5708 type 2 (capable of AMS 5709) Heat Treatment is as follows Solution Treat 1900 - 1975°F / 1-4 hours and Air Cool Resulting hardness not higher than 302HB Stabilization Heat Treatment Heat to 1550°F / 4 hrs and Air Cool Precipitaion Heat Treatment Heat to 1400°F / 16 hrs and Air Cool Resulting hardness 32-42 HRC Specifications Waspaloy Rod, Bar, Wire and Forging Stock ASTM B 637, ISO 9723, ISO 9724, ISO 9725, AMS 5704, AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828, MAM 5706, AECMA PrEN 2193, AECMA PrEN 2194, AECMA PrEN 2406, AECMA PrEN 2958, AECMA PrEN 2959, AECMA PrEN 2960, AECMA PrEN 3220. Waspaloy Plate, Sheet and Strip AMS 5544, AECMA PrEN 2195 Waspaloy Other UNS N07001, W. Nr 2.4654. Kovar https://www.nickelalloys.in/kovar.htm https://www.nickelalloys.in/kovar.htm Mon, 21 Jan 2019 00:00:00 +0530 Kovar round bars UNS K94610 EN 1.3981 contain Chromium 0.20% max, Manganese 0.5% max, Nickel 29% max, Silicon 0.2% max which is commonly used in various daily applications such as Kovar open die forging parts, forging pieces, forging nozzles forged crankshaft that is used in Dimensionally stable instruments and optical devices, Containers for LNG tankers, Transfer lines for LNG. Kovar in the annealed condition can be strengthened further by relatively low temperature heat treatment. Kovar bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Kovar round bars along in types of Kovar bright round bars, Kovar hexagonal bars, Kovar square bars, Kovar hex bars, Kovar flat bars, Kovar threaded bars and Kovar forged bars. All the Kovar bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Kovar rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Kovar bars we stock: Kovar cold drawn & polished round, hex, square, threaded, forged bars Kovar cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Kovar peeled and turned round, hex, square, threaded, forged bars Kovar buffed round, hex, square, threaded, forged bars Kovar chamfered round, hex, square, threaded, forged bars Kovar solution annealed round, hex, square, threaded, forged bars Kovar forged round, hex, square, threaded forged bars with annealed and aged condition Application of Kovar round bars:Kovar open die forging parts, forging pieces, forging nozzles forged crankshaft that is used in dimensionally stable instruments and optical devices, Containers for LNG tankers, Transfer lines for LNG. Copper Nickel 90/10 https://www.nickelalloys.in/copper-nickel-90-10.htm https://www.nickelalloys.in/copper-nickel-90-10.htm Mon, 21 Jan 2019 00:00:00 +0530 Cupro Nickel 90-10 round bars UNS C70600 Wr No. 2.0872 contain Manganese 0.7% max, Nickel 10%, Iron 1.5% which is commonly used in various daily applications such as marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats. Cupro Nickel 90-10 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 90-10 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 90-10 round bars along in types of Cupro Nickel 90-10 bright round bars, Cupro Nickel 90-10 hexagonal bars, Cupro Nickel 90-10 square bars, Cupro Nickel 90-10 hex bars, Cupro Nickel 90-10 flat bars, Cupro Nickel 90-10 threaded bars and Cupro Nickel 90-10 forged bars. All the Cupro Nickel 90-10 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 90-10 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Cupro Nickel 90-10 bars we stock: Cupro Nickel 90-10 cold drawn & polished round, hex, square, threaded, forged bars Cupro Nickel 90-10 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Cupro Nickel 90-10 peeled and turned round, hex, square, threaded, forged bars Cupro Nickel 90-10 buffed round, hex, square, threaded, forged bars Cupro Nickel 90-10 chamfered round, hex, square, threaded, forged bars Cupro Nickel 90-10 solution annealed round, hex, square, threaded, forged bars Cupro Nickel 90-10 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Cupro Nickel 90-10 round bars:Marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats Mu Metal https://www.nickelalloys.in/mu-metal.htm https://www.nickelalloys.in/mu-metal.htm Mon, 21 Jan 2019 00:00:00 +0530 Mumetal is available in Mumetal wire, Mumetal Round bar, Mumetal Forged bar, Mumetal hex bar, Mumetal Flat bar, Mumetal Circles, Mumetal Ring, Mumetal Tube, Mumetal seamless Pipe, Mumetal Welded / ERW Pipe, Mumetal Sheet, Mumetal Plate, Mumetal Coil, Mumetal Flanges, Mumetal fasteners, Mumetal Socket weld Fittings, Mumetal ferrule fittings, Mumetal Buttweld fittings Like cap, elbow, tee, Reducer.Mumetal is 80% nickel with additions of iron and molybdenum as main elements in turn this alloy offers an extremely high initial permeability. It is only moderately resistant to moisture and atmospheric corrosion, it used mainly in in transformer cores but is well known for its magnetic properties which are used for shielding electrical components from magnetic fields. "HYMU 80" has a minimum DC permeability of 80,000 at a flux density of 40 gauss when heat treated by the recommended procedure and test in accordance with ASTM 596 Physical Properties (Annealed Condition) Coefficient of Thermal Expansion, in./in. °F x 10 7.2in/in °F x 10-6 between 70 and 400F 13cm/cm/ °C 10-6 between 30 and 204 °C Specifications Permalloy HYMU 80 MAG 7904 MIL N 14411 C, COMP. 1 ASTM A753-78 and ASTM 596 Hiperco 50 https://www.nickelalloys.in/hiperco-50.htm https://www.nickelalloys.in/hiperco-50.htm Mon, 21 Jan 2019 00:00:00 +0530 Hiperco 50 round bars contains 49% cobalt and 2% vanadium which is commonly used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores. Hiperco 50 bars are available in ASTM A-801 and AMS A-47182 specifications. We Export and Stock Hiperco 50 round bars along in types of Hiperco 50 bright round bars, Hiperco 50 hexagonal bars, Hiperco 50 square bars Hiperco 50 hex bars, Hiperco 50 flat bars, Hiperco 50 threaded bars and Hiperco 50 forged bars. All the Hiperco 50 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hiperco 50 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Hiperco 50 bars we stock: Hiperco 50 round bars solution annealed round, hex, square, threaded, forged bars Hiperco 50 round bars forged round, hex, square, threaded forged bars with annealed and aged condition. Application of Hiperco 50 round bars:Used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores. Tantalum https://www.nickelalloys.in/tantalum.htm https://www.nickelalloys.in/tantalum.htm Mon, 21 Jan 2019 00:00:00 +0530 Tantalum round bars UNS R05200/R05252 which is commonly used making electronic components, nuclear reactors, chemical equipment, semiconductors, heat exchangers and for radiation shielding. Tantalum alloy can easily worked out in room temperature. Tantalum bars are available in ASTM A-801 and AMS A-47182 specifications. We Export and Stock Tantalum round bars along in types of Tantalum bright round bars, Tantalum hexagonal bars, Tantalum square bars Tantalum hex bars, Tantalum flat bars, Tantalum threaded bars and Tantalum forged bars. All the Tantalum bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Tantalum rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Tantalum bars we stock: Tantalum round bars solution annealed round, hex, square, threaded, forged bars Tantalum round bars forged round, hex, square, threaded forged bars with annealed and aged condition. Application of Tantalum round bars:Making electronic components, nuclear reactors, chemical equipment, semiconductors, heat exchangers and for radiation shielding. Fabrication Services https://www.nickelalloys.in/fabrication-services.htm https://www.nickelalloys.in/fabrication-services.htm Wed, 09 Jan 2019 00:00:00 +0530 We are service providers of fabrication services. Harsh steel - specialist fabrications of exotic materials for the offshore industry as per customer reqirements. Harsh steel is a specialised exotic nickel alloys such as inconel, monel, hastelloy, stainless steel, titanium, tantalum metals fabricator for the offshore and petrochemical, pharma, oil and gas industries. The company does the job on outsourced basis with its technique of supplying or importing raw materials and finalising the components with cheaper costs in addition to our fabrication service we offer a full subcontract design and drawing package. The company has an ongoing commitment to maintain and improve the high quality and standards required by our offshore and petrochemical customers. Our extensive understanding of the exacting standards required by the offshore industry enables us to provide you with an excellent service. We pride ourselves on our ability to meet these exacting standards and the often short delivery requirements of the marketplace. Types of specialist metals for which harsh steel provides customised fabrication harsh steel is able to offer fabrication and welding services for the following materials: titanium, hastelloy alloys, inconel alloys, incoloy, zeron 100, super duplex, duplex, stainless steel - 316l and 304l, 6mo, cupro nickel, monel etc. Types of nickel alloys and titanium fabricated products harsh steel from past 20 years supplying raw materials to various fabrication companies, so it planned to do the fabrication with its own outsourced services. Our highly skilled project and production team has a wealth of experience in dealing with complex and difficult fabrication issues, and we pride ourselves on our can-do attitude and solutions-driven approach to sometimes complex fabrications. We have outsourced and manufactured pressure vesselsshell and tube heat exchangersturbine shaft assemblyfilterssheet metal componentsnozzles and ferrule fittingsvalvesvesselspipe work and fittings along with u pipesheating pipes Stainless Steel Products https://www.nickelalloys.in/stainless-steel-products.htm https://www.nickelalloys.in/stainless-steel-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Nickel Alloy Products https://www.nickelalloys.in/nickel-alloy-products.htm https://www.nickelalloys.in/nickel-alloy-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Titanium Alloys Products https://www.nickelalloys.in/titanium-alloys-products.htm https://www.nickelalloys.in/titanium-alloys-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Copper Nickel Alloys https://www.nickelalloys.in/copper-nickel-alloys.htm https://www.nickelalloys.in/copper-nickel-alloys.htm Wed, 09 Jan 2019 00:00:00 +0530 Aluminium Alloys Products https://www.nickelalloys.in/aluminium-alloys-products.htm https://www.nickelalloys.in/aluminium-alloys-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Duplex Steel Products https://www.nickelalloys.in/duplex-steel-products.htm https://www.nickelalloys.in/duplex-steel-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Fasteners https://www.nickelalloys.in/fasteners.htm https://www.nickelalloys.in/fasteners.htm Wed, 09 Jan 2019 00:00:00 +0530 Speciality Products https://www.nickelalloys.in/speciality-products.htm https://www.nickelalloys.in/speciality-products.htm Wed, 09 Jan 2019 00:00:00 +0530 Valves https://www.nickelalloys.in/valves.htm https://www.nickelalloys.in/valves.htm Speciality Products Wed, 09 Jan 2019 00:00:00 +0530 CNC Machined Components https://www.nickelalloys.in/cnc-machined-components.htm https://www.nickelalloys.in/cnc-machined-components.htm Speciality Products Wed, 09 Jan 2019 00:00:00 +0530 Stainless Steel 420 https://www.nickelalloys.in/stainless-steel-420.htm https://www.nickelalloys.in/stainless-steel-420.htm Fri, 18 Jan 2019 00:00:00 +0530 Alloy 420 is available in Bar (Hexagon, Round, Square, Flat), Billet, Wire, Strip.Alloy 420 is a martensitic stainless steel of the 12% Chromium type. Due to it's Chromium content 420 will achieve high hardness. Alloy 420 is used in many different applications including surgical and dental instruments, scissors, needle valves, gears, ball bearings, magnets etc. Alloy 420 should not be used for springs or heavily stressed parts that require to be operated at sub-zero temperatures. Specifications AMS 5506 Sheet / strip / plate AMS 5620 Bars / forging (free mach) AMS 5621 Bars / wire / forgings QQ-S-763 ASTM A276 / ASME SA276 ASTM A314 / ASME SA314 ASTM A484 / ASME SA484 ASTM A580 / ASME SA580 BS 3S62 BS 970; 420S37 / 420S29 / 420S45 EN56B / EN56C / EN56D Werkstoff 1.3541 Werkstoff 1.4024 Werkstoff 1.4028 AFNOR Z20C13 UNS S42000 Stainless Steel 430 https://www.nickelalloys.in/stainless-steel-430.htm https://www.nickelalloys.in/stainless-steel-430.htm Fri, 18 Jan 2019 00:00:00 +0530 Grade 430 is available in Sheet, Bar (Hexagon, Round), Tube (Square, Rectangular and Round), Wire, Rings.Grade 430, also known as type WL 1.4016 stainless steel combines good corrosion resistance with good formability and ductility. As Grade 430 has excellent resistance to nitric attack it is well suited to use in chemical applications. Grade 430 is generally used for domestic appliances, flue linings, scientific apparatus etc.Specifications AMS 5627 Bars / wire / forgings AMS 5503 Sheet / strip / plate QQ-S-763 QQ-S-764 QQ-S-766 MIL-W-52263 ASTM A276 / ASME SA276 ASTM A479 / ASME A479 ASTM A484 / ASME SA484 BS 970; 430S17 / 430S15 EN60 Werkstoff 1.4016 Werkstoff 1.4104 AFNOR Z8C17 AFNOR Z10CF17 (430F) UNS S43000 Stainless Steel 431 https://www.nickelalloys.in/stainless-steel-431.htm https://www.nickelalloys.in/stainless-steel-431.htm Fri, 18 Jan 2019 00:00:00 +0530 Grade 431 is available in Bar (Round), Strip, Wire, Rod, Billet.Alloy 431 is the most corrosion resistant of the martensitic grades. Due to Alloy 431's excellent tensile and torque strength and good toughness it is used in structural parts that are exposed to marine atmosphere, also for aircraft fasteners and fittings. Specifications Grade 431 Stainless Steel Bar, Wire, Forgings, Tube AMS 5628 Bars / wire / forgings AMS-S-18732 MIL-S-18732 QQ-S-763 ASTM A276 / ASME SA276 ASTM A478 / ASME A478 ASTM A314 / ASME SA314 ASTM A484 / ASME SA484 ASTM A580 / ASME SA580 BS 7S80 BS 970; 431S29 EN57 UNS S43100 DMS-1565 Stainless Steel 440 https://www.nickelalloys.in/stainless-steel-440.htm https://www.nickelalloys.in/stainless-steel-440.htm Fri, 18 Jan 2019 00:00:00 +0530 Applications: Typical applications include: Rolling element bearings Valve seats High quality knife blades Surgical instruments Chisels Heat Treatment: Annealing – Full anneal – 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing – 735-785°C and slow furnace cool. Hardening – Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table. Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance. Welding:-If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility. Alloy 188 https://www.nickelalloys.in/alloy-188.htm https://www.nickelalloys.in/alloy-188.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 188 is available in Cobalt Alloy 188 wire, Cobalt Alloy 188 Round bar, Cobalt Alloy 188 Forged bar, Cobalt Alloy 188 hex bar, Cobalt Alloy 188 Flat bar, Cobalt Alloy 188 Circles, Cobalt Alloy 188 Ring, Cobalt Alloy 188 Tube, Cobalt Alloy 188 seamless Pipe, Cobalt Alloy 188 Welded / ERW Pipe, Cobalt Alloy 188 Sheet, Cobalt Alloy 188 Plate, Cobalt Alloy 188 Coil, Cobalt Alloy 188 Flanges, Cobalt Alloy 188 fasteners, Cobalt Alloy 188 Socket weld Fittings, Cobalt Alloy 188 ferrule fittings, Cobalt Alloy 188 Buttweld fittings Like cap, elbow, tee, Reducer.Haynes 188 / Udimet alloy 188 is a cobalt based nickel-chromium-tungsten alloy with a small addition of lanthanum to give a very protective scale. Alloy 188 combines excellent high-temperature strength with good resistance to both oxidizing environments up to 2000°F and to sulfate deposit hot corrosion. Cobalt Alloy 188 has good forming characteristics and is capable of being forged, hot worked or cold worked, althoug it does work-harden very rapidly so frequent intermediate annealing treatments are recommend for complex forming operations. Cobalt Alloy 188 is supplied solution heat treated at 2150°F and rapid air or water quenched to attain optimum properties. A combination of good fabricability and weldability makes Cobalt Alloy 188 suitable for a wide number of applications, particularly in gas turbine components such as combustors, flame holders, liners and tranistion ducts.Specifications AMS 5608 Sheet, Strip and Plate AMS 5772 Bars, Forgings and Rings AMS 5801 Welding Wire UNS R30188 GE B50A712 GE B50TF59 GE B50TF74     Alloy N-155 https://www.nickelalloys.in/alloy-n-155.htm https://www.nickelalloys.in/alloy-n-155.htm Mon, 21 Jan 2019 00:00:00 +0530 Multimet N155 is available in Multimet N155 wire, Multimet N155 Round bar, Multimet N155 Forged bar, Multimet N155 hex bar, Multimet N155 Flat bar, Multimet N155 Circles, Multimet N155 Ring, Multimet N155 Tube, Multimet N155 seamless Pipe, Multimet N155 Welded / ERW Pipe, Multimet N155 Sheet, Multimet N155 Plate, Multimet N155 Coil, Multimet N155 Flanges, Multimet N155 fasteners, Multimet N155 Socket weld Fittings, Multimet N155 ferrule fittings, Multimet N155 Buttweld fittings Like cap, elbow, tee, Reducer.Multimet N155 is a Nickel-Chromium-Cobalt alloy with additions of Molybdenum and Tungsten used typically in parts requiring high strength up to 1350°F and oxidation resistance up to 1800°F. Its high-temperature properties are inherent in the as-supplied condition (solution treated at 2150°F) and are not dependent on age-hardening. Multimet N155 is used in a number of aerospace applications such as tailpipes and tail cones, turbine blades, shafts and rotors, afterburner components and high-temperature bolts.Specifications AMS 5532 Sheet, Plate and Strip AMS 5769 Bars, Rings and Forgings AMS 5794 Welding Wire AMS 5795 Coated Electrodes UNS R30155 Alloy 230 https://www.nickelalloys.in/alloy-230.htm https://www.nickelalloys.in/alloy-230.htm Mon, 21 Jan 2019 00:00:00 +0530 Alloy 230 is a nickel-chromium-tungsten-molybdenum alloy that combines excellent high temperature strength, outstanding resistance to nitriding environments and excellent long term thermal stability. Haynes 230 is easily fabricated and has very good forming and welding characteristics. Due to Haynes 230 combined properties it is very well suited to a wide variety of component applications in the aerospace and power industries. Haynes 230 is used for combustion cans, transition ducts, flame holders, thermocouple sheaths and other important gas turbine components. Haynes alloy 230 is solution treated at 2150 to 2275°F followed by rapid cooling, and is supplied in this condition (as per AMS 5891 and AMS 5878). Haynes 230 can be both hot worked and cold worked and all parts should be annealed and rapidly cooled in order to restore the best balance properties.Specifications UNS N06230 AMS 5878 - Sheet, Strip and Plate AMS 5891 - Bar and Forging GE B50TF246 DIN 17744 No 2.4733 NiCr22W14Mo ASME SB 435 Sheet, Strip and Plate ASME SB 572 Bar and Rod ASME SB 564 Forgings ASME SB 619 Welding Pipe ASME SB 622 Seamless Tube and Pipe ASME SB 626 Welded Tube ASME SB 366 Fittings ASTM B435 Sheet, Strip and Plate ASTM B572 Bar and Rod ASTM B564 Forgings ASTM B619 Welded Pipe ASTM B 622 Seamless Tube and Pipe ASTM B626 Welded Tube ASTM B366 Fittings Haynes 230 Inconel 601 https://www.nickelalloys.in/inconel-601.htm https://www.nickelalloys.in/inconel-601.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 601 (UNS N06601) is available in  Nickel Alloy 601 wire, Nickel Alloy 601 Round bar, Nickel Alloy 601 Forged bar, Nickel Alloy 601 hex bar, Nickel Alloy 601 Flat bar, Nickel Alloy 601 Circles, Nickel Alloy 601 Ring, Nickel Alloy 601 Tube, Nickel Alloy 601 seamless Pipe, Nickel Alloy 601 Welded / ERW Pipe, Nickel Alloy 601 Sheet, Nickel Alloy 601 Plate, Nickel Alloy 601 Coil, Nickel Alloy 601 Flanges, Nickel Alloy 601 fasteners, Nickel Alloy 601 Socket weld Fittings, Nickel Alloy 601 ferrule fittings, Nickel Alloy 601 Buttweld fittings Like cap, elbow, tee, Reducer.Inconel 601 is a nickel-chromium combination utilized for applications that oblige imperviousness to corrosion and heat. This nickel alloy emerges because of its imperviousness to high temperature oxidation, remaining very impervious to oxidation through 2200°F. Alloy 601 creates a hard disciple oxide scale which opposes spalling significantly under states of serious thermal cycling. This nickel alloy has great high temperature quality, and holds its pliability after long administration introduction. It has great imperviousness to aqueous corrosion, high mechanical strength, and is promptly framed, machined and welded. Inconel 601's properties make it a material of wide utility in fields like thermal processing, substance preparing, contamination control, aviation, and force era. Nonetheless, alloy 601 is not proposed for utilization in determinedly diminishing, sulfur bearing environments.Alloy 601 (UNS N06601) is a Nickel-Chromium alloy with an addition of Aluminium for outstanding resistance to oxidation and other forms of high temperature corrosion. Alloy 601 also has high mechanical properties at elevated temperatures. Alloy 601 is used for industrial furnaces, radiant tubes, themocouple tubes and heat treatment equipment, baskets, muffles, retorts. Petrochemical process equipment and aircraft componentsIn what form is Inconel 601 available at Harsh Steel? Inconel 601 Sheet Inconel 601 Plate Inconel 601 Bar Inconel 601 Pipe & Tube (welded & seamless) Inconel 601 Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Inconel 601 Wire What are the characteristics of Inconel 601? Outstanding oxidation resistance to 2200° F Resists spalling even under severe thermal cycling conditions Highly resistant to carburization Good creep rupture strength Metallurgical stability Specifications UNS N06601 ASTM B168 Plate ASTM B166 Bar ASTM B167 Seamless Pipe ASTM B163 Seamless Tube ASTM B564 Forgings DIN 17752 AMS 5715 Bar, Forgings and Rings AMS 5870 Sheet, Strip and Plate Inconel 601 Inconel 617 https://www.nickelalloys.in/inconel-617.htm https://www.nickelalloys.in/inconel-617.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 617 is available in Inconel 617 wire, Inconel 617 Round bar, Inconel 617 Forged bar, Inconel 617 hex bar, Inconel 617 Flat bar, Inconel 617 Circles, Inconel 617 Ring, Inconel 617 Tube, Inconel 617 seamless Pipe, Inconel 617 Welded / ERW Pipe, Inconel 617 Sheet, Inconel 617 Plate, Inconel 617 Coil, Inconel 617 Flanges, Inconel 617 fasteners, Inconel 617 Socket weld Fittings, Inconel 617 ferrule fittings, Inconel 617 Buttweld fittings Like cap, elbow, tee, Reducer. Nickel Alloy 617 (UNS N06617) is a nickel-chromium-cobalt-molybdenum alloy with a remarkable consolidation of high-temperature quality and oxidation resistance. The high nickel and chromium contents make the alloy impervious to a mixed bag of both reducing and oxidizing situations, while the aluminum with the chromium gives oxidation resistance at high temperatures. Those components with the molybdenum empower the compound to withstand numerous wet destructive situations.Specifications UNS N06617 ASTM B 166 Werkstoff 2.4663a ASME SB-166, Boiler Code Sections I, VIII, SAE AMS 5887, SAE AMS 5888 and SAE AMS 5889 Inconel 617 Inconel 901 https://www.nickelalloys.in/inconel-901.htm https://www.nickelalloys.in/inconel-901.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 901 is available in Nimonic 901 wire, Nimonic 901 Round bar, Nimonic 901 Forged bar, Nimonic 901 hex bar, Nimonic 901 Flat bar, Nimonic 901 Circles, Nimonic 901 Ring, Nimonic 901 Tube, Nimonic 901 seamless Pipe, Nimonic 901 Welded / ERW Pipe, Nimonic 901 Sheet, Nimonic 901 Plate, Nimonic 901 Coil, Nimonic 901 Flanges, Nimonic 901 fasteners, Nimonic 901 Socket weld Fittings, Nimonic 901 ferrule fittings, Nimonic 901 Buttweld fittings Like cap, elbow, tee, Reducer.Alloy 901 is an age-hardenable super alloy which contains Titanium and Aluminium for precipitation hardening and molybdenum for soild-solution strengthening. Alloy 901 has high yield strength and creep resistance at temperatures to about 1110°F (600°C). As Alloy 901 has a substantial iron content it enables alloy 901 to combine strength with good forging characteristics. Alloy 901 is commonly used for gas turbine engine discs, shafts, rings, casings and seals.Specifications UNS N09901 Werkstoff Number 2.4662 BR HR 55 AMS 5660 AMS 5661 AECMA PrEN2176 AECMA PrEN2177 ISO 9723 ISO 9725 Nimonic alloy 901 Nimonic 80A https://www.nickelalloys.in/nimonic-80a.htm https://www.nickelalloys.in/nimonic-80a.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 80A is available in Nimonic 80A wire, Nimonic 80A Round bar, Nimonic 80A Forged bar, Nimonic 80A hex bar, Nimonic 80A Flat bar, Nimonic 80A Circles, Nimonic 80A Ring, Nimonic 80A Tube, Nimonic 80A seamless Pipe, Nimonic 80A Welded / ERW Pipe, Nimonic 80A Sheet, Nimonic 80A Plate, Nimonic 80A Coil, Nimonic 80A Flanges, Nimonic 80A fasteners, Nimonic 80A Socket weld Fittings, Nimonic 80A ferrule fittings, Nimonic 80A Buttweld fittings Like cap, elbow, tee, Reducer.Alloy 80A (Nimonic alloy 80A) is a wrought, age-hardenable nickel-chromium alloy. Alloy 80A is similar toalloy 75 but made precipitation hardenable by additions of aluminium and titanium. Alloy 80A has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 815ºC (1500ºF). Vacuum refined versions are also available. Alloy 80A is used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines and has many other offshore/marine, automotive and electrical applications. Nimonic 263 https://www.nickelalloys.in/nimonic-263.htm https://www.nickelalloys.in/nimonic-263.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 263 is available in Nimonic 263 wire, Nimonic 263 Round bar, Nimonic 263 Forged bar, Nimonic 263 hex bar, Nimonic 263 Flat bar, Nimonic 263 Circles, Nimonic 263 Ring, Nimonic 263 Tube, Nimonic 263 seamless Pipe, Nimonic 263 Welded / ERW Pipe, Nimonic 263 Sheet, Nimonic 263 Plate, Nimonic 263 Coil, Nimonic 263 Flanges, Nimonic 263 fasteners, Nimonic 263 Socket weld Fittings, Nimonic 263 ferrule fittings, Nimonic 263 Buttweld fittings Like cap, elbow, tee, Reducer.Nimonic alloy 263 is an age-hardenable nickel-cobalt-chrome-molybdenum alloy which was designed to have excellent fabrication characteristics in the annealed condition but also very good aged strength properties. Alloy 263 is easier to form or weld than other materials such as Waspaloy or Rene 41 and exhibits excellent intermediate temperature ductility. Alloy 263 is supplied in the annealed condition and its excellent ductility in this condition makes it suitable for cold forming as well as hot working. Alloy 263 can be welded using matching composition filler wire in both TIG and MIG forms. The recommended heat treatments for Nimonic 263 are as follows:Specifications UNS N07263 Werkstoff Nr. 2.4650 BS HR10 Rod and Bar BS HR 206 Plate, Sheet, Strip BS HR 404 Seamless Tube AECMA PrEn 2199 Bar AECMA PrEn 2200 Forgings AECMA PrEn 2201 Bar AECMA PrEn 2202 Tube AECMA PrEn 2203 Sheet, Strip AECMA PrEn 2418 Plate DIN 17750 Plate, Sheet, Strip DIN 17751 Pipe and Tube DIN 17752 Bar and Rod DIN 17753 Wire DIN 17754 Forgings AMS 5872 Sheet, Plate and Strip AMS 5886 Bar, Forgings, Rings AFNOR NCK 20 D AIR 9165 Sheet, Plate, Rod, Bar and Forgings MSRR 7035 MSRR 7036 GE B50A774A Grade 3 https://www.nickelalloys.in/grade-3.htm https://www.nickelalloys.in/grade-3.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium CP Grade 3 is available as: Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.Specifications AMS 4900 - Sheet, strip, plate MIL-T-9046J CP2 - Sheet, strip, plate AMS-T-9046B CP2 - Sheet, strip, plate ASTM B265 - Gr3 Sheet, plate ASTM B337 - Gr3 Pipe (withdrawn) ASTM B338 - Gr3 heat exchanger tube ASTM B348 - Gr3 bar ASTM B367 - Gr3 castings ASTM B381 - Gr3 forgings ASTM F67 - Gr3 Surgical Implant ASTM F467 - Gr3 nuts ASTM F468 - Gr3 bolts MSRR 8608 DTD 5023 DTD 5273 T50 Werkstoff 3.7054 Werkstoff 3.7055 LN 9297 Grade 6 https://www.nickelalloys.in/grade-6.htm https://www.nickelalloys.in/grade-6.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium Ti5Al2 5Sn is available in: Bar, Billet, Castings, Extrusion, Plate, Sheet, Wire. Titanium Ti5Al2.5Sn (Grade 6) is a high strength alloy which is most commonly used in airframe and jet engine applications. Titanium Ti5Al2.5Sn (Grade 6) has good weldability, stability and strength at elevated temperatures.Specifications AMS 4926 Bars, Wire and Rings AMS 4966 Forgings ASTM B367 Gr6 UNS R54520 AMS 4909 Sheet, Strip, Plate (EL1 grade) AMS 4910 Sheet, Strip, Plate AMS 4924 Bars, Forgings, Ring (EL1 grade) AMS 4926 Bar, Wire, Ring (Annealed - 110 ksi) AMS 4966 Forgings AMS 6900 Bars AMS-T- 9046 A-1 Sheet, Strip, Plate AMS-T- 9047 5Al-2.5Sn Bar AMS-T-9046 A-2 (EL1) Sheet, Strip, Plate MIL-T-9046J A-1 Sheet, Strip, Plate MIL-T-9046H Type II Comp A Sheet, Strip, Plate MIL-T-9046H Type II Comp B Sheet, Strip, Plate MIL-T-9047G Bar DTD 5083 TA14 (w/drawn) TA15 (w/drawn) TA16 (w/drawn) TA17 (w/drawn) Aluminum Alloy 5154 https://www.nickelalloys.in/aluminum-alloy-5154.htm https://www.nickelalloys.in/aluminum-alloy-5154.htm Wed, 23 Jan 2019 00:00:00 +0530 Alloy 5154( 5154a) is available in Plate, Sheet, Strip, Tube, Forging Stock, Rivet Stock, Bar and Wire. Alloy 5154A tube is available in many sizes from stock, however there is a minimum production of 30m.Specifications BS N5 Alcan GB-54S Alcoa-520 AWCO-27 Birmabright-BB3 Duricilium-B Hiduminium-33 BA 27 Peraluman-350 Aluminum Alloy 6063 https://www.nickelalloys.in/aluminum-alloy-6063.htm https://www.nickelalloys.in/aluminum-alloy-6063.htm Wed, 23 Jan 2019 00:00:00 +0530 Alloy 6063 is available in Bar, Rod, Wire, Tube and Extrusions.Specifications AMS 4156 ASTM B221, ASTM B241, ASTM B491, ASTM B483, ASTM B210, ASTM B241, ASTM B345 And ASTM B429 MIL-P-25995 QQ-A-200/9 ASME SB221, ASME SB241 And ASME SB210 Aluminum Alloy 6082 https://www.nickelalloys.in/aluminum-alloy-6082.htm https://www.nickelalloys.in/aluminum-alloy-6082.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminum Alloy 6082 is available in Sheet and Plate, Aluminum 6082 Bar, 6082 is also available in Drawn Tube, Tube and Forging Stock.Alloy 6082 is a medium strength alloy with excellent corrosion resistance. Alloy 6082 has the highest strength of the 6000 series alloy. Due to the higher strength of Alloy 6082 it has replaced Alloy 6061 in many applications. Alloy 6082 is typically used in highly stressed applications, Trusses, Bridges, Cranes, Transport applications, Ore Skips, Beer Barrels, Milk churns.SpecificationsAluminium alloy 6082 also corresponds to the following standard designations and specification. AA6082 HE30 DIN 3.2315 EN AW-6082 ISO AlSi1MgMn A96082 Similar Specifications BS L111 Alloy 6082-T6 Bars and Sections BS L112 Alloy 6082 Forging Stock and Forgings BS L113 Alloy 6082-T6 Sheet and Strip BS L114 Alloy 6082-T6 Tube Drawn BS L115 Alloy 6082-T651 Plate BS HE30 6082 Extrusions BS HP30 6082 Plate BS HT30 6082 Tube BS HG30 6082 Wire BS HS30 6082 Sheet Werkstoff 3.2315 EN 2326 6082-T6 Extruded bar EN 2636 6082-T6 Bar (with peripheral coarse grain control) EN 4273 EN 4274 (with peripheral coarse grain control) Alcoa-920 Birmetal-071 BA 25 Durcilium-S Hiduminium-44 Anticorodal-090 AlMgSi1Mn A-SGM0.7 AECMA 2389 Tube AECMA 2390 Tube UNI 3571 UNI 9006/4 L-3453 Aluminum Alloy 7050 https://www.nickelalloys.in/aluminum-alloy-7050.htm https://www.nickelalloys.in/aluminum-alloy-7050.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminum Alloy 7050 is available in Plate, Extruded Wire, Rod and Bar.Aluminium alloy 7050 is an aerospace grade of aluminium combining high strength, stress corrosion cracking resistance and toughness. It is particularly suited for heavy plate applications (3" to 6" thick) due to it's lower quench sensitivity and retention of strength in thicker sections. Aluminium 7050 therefore is the premium choice aerospace aluminium for applications such as fuselage frames, bulkheads and wing skins.Aluminium 7050 plate is available in two tempers. T7651 (AMS 4201) combines the highest strength with good exfoliation corrosion resistance and average SCC resistance. T7451 (AMS 4050) provides better SCC resistance and excellent exfoliation resistance at slightly lower strength levels.Specifications AMS 4050: 7050-T7451 Plate AMS 4107:7050-T74 Die Forging AMS 4108:7050-T7452 Hand Forgings AMS 4201: 7050-T7651 Plate AMS 4333: 7050-T7452 Forgings AMS 4340: 7050-T76511 Extrusions AMS 4341: 7050-T73511 Extrusions AMS 4342: 7050-T74511 Extrusions Nut https://www.nickelalloys.in/nut.htm https://www.nickelalloys.in/nut.htm Fri, 11 Jan 2019 00:00:00 +0530 Products Range : Standard Hexagon Fine Pitch Left Hand Lock/Half Glenloch Wing Weld Nylon Insert    Slotted Coupling Flange Dome/Cap/Acorn Bolts https://www.nickelalloys.in/bolts.htm https://www.nickelalloys.in/bolts.htm Fri, 11 Jan 2019 00:00:00 +0530 Products Range : Cup Head Bolts Eye Bolts U/V-Bolts Ring Bolts Washers https://www.nickelalloys.in/washers.htm https://www.nickelalloys.in/washers.htm Fri, 11 Jan 2019 00:00:00 +0530 Products Range : Square Washers Flat Round Washers Spring Washers Ball Valve https://www.nickelalloys.in/ball-valve.htm https://www.nickelalloys.in/ball-valve.htm Fri, 11 Jan 2019 00:00:00 +0530 Special Design Features  : Cryogenic Design Subsea Design Stem Extension Single & Double Piston Seat Design Primary Metal and Secondary Soft Seat Design Emergency Seat and Stem Lubricant Injection Dual Plate Check Valves https://www.nickelalloys.in/dual-plate-check-valves.htm https://www.nickelalloys.in/dual-plate-check-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Dual Plate Check Valves are available in five different types: Wafer Type Solid Lug Type Double Flange type Hub End type Butt weld end type Gate Valves https://www.nickelalloys.in/gate-valves.htm https://www.nickelalloys.in/gate-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Gate Valves are available in six different types: Wedge type Bolted Bonnet Wedge type pressure seal bonnet Parallel Slide Bolted Bonnet Parallel Slide Pressure Seal Bonnet Conduit Bolted Bonnet Slab Gate Conduit Bolted Bonnet Expanding Gate Globe Valve https://www.nickelalloys.in/globe-valve.htm https://www.nickelalloys.in/globe-valve.htm Fri, 11 Jan 2019 00:00:00 +0530 Globe Valves are available in three different types: Bolted Bonnet Pressure seal Bellows Seal Check Valves https://www.nickelalloys.in/check-valves.htm https://www.nickelalloys.in/check-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Check Valves are available in six different types: Swing Type Bolted Bonnet Piston Type Check Valves Non-Slam Check Valves Tilting Disc Type Pressure Seal Bonnet Nozzle Type Plug Valves https://www.nickelalloys.in/plug-valves.htm https://www.nickelalloys.in/plug-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Plug Valves are available in three different types versions: Full Bore Regular Bore Extended Stem Valves Bleed Valves https://www.nickelalloys.in/bleed-valves.htm https://www.nickelalloys.in/bleed-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Special Design Feature : Full Bore & Reduce Bore Cryogenic Subsea Design High Temperature High Pressure (HPHT) Service Butterfly Valves https://www.nickelalloys.in/butterfly-valves.htm https://www.nickelalloys.in/butterfly-valves.htm Fri, 11 Jan 2019 00:00:00 +0530 Butterfly Valves are available in four different types versions: Double Offset Triple Offset Centre Disc Extended Stem Instrumentation Manifolds https://www.nickelalloys.in/instrumentation-manifolds.htm https://www.nickelalloys.in/instrumentation-manifolds.htm Mon, 21 Jan 2019 00:00:00 +0530 M.O.C: Body-ASTM A182 F 316(L), 304(L) etc.  All other spares in ASTM A 479/A276 Gr. 316(L), 304(L). Other M. O. C’s: Titanium, Monel, Hastelloy C. etc. Products can be supplied to conform to NACE MR 0175. Refractory Anchor https://www.nickelalloys.in/refractory-anchor.htm https://www.nickelalloys.in/refractory-anchor.htm Fri, 11 Jan 2019 00:00:00 +0530 Actuator https://www.nickelalloys.in/actuator.htm https://www.nickelalloys.in/actuator.htm Fri, 11 Jan 2019 00:00:00 +0530 Clevis https://www.nickelalloys.in/clevis.htm https://www.nickelalloys.in/clevis.htm Fri, 11 Jan 2019 00:00:00 +0530 Drag Link https://www.nickelalloys.in/drag-link.htm https://www.nickelalloys.in/drag-link.htm Fri, 11 Jan 2019 00:00:00 +0530 Lever Assembly https://www.nickelalloys.in/lever-assembly.htm https://www.nickelalloys.in/lever-assembly.htm Fri, 11 Jan 2019 00:00:00 +0530 Nozzle Plate https://www.nickelalloys.in/nozzle-plate.htm https://www.nickelalloys.in/nozzle-plate.htm Fri, 11 Jan 2019 00:00:00 +0530 Seal Inner https://www.nickelalloys.in/seal-inner.htm https://www.nickelalloys.in/seal-inner.htm Fri, 11 Jan 2019 00:00:00 +0530 Valve Housing https://www.nickelalloys.in/valve-housing.htm https://www.nickelalloys.in/valve-housing.htm Fri, 11 Jan 2019 00:00:00 +0530 Stainless Steel Hoses https://www.nickelalloys.in/stainless-steel-hoses.htm https://www.nickelalloys.in/stainless-steel-hoses.htm Fri, 11 Jan 2019 00:00:00 +0530 Stainless steel annular corrugated metallic flexible hoses are manufacturing in austantic steel ANSI 321, 316, 316L & 304 grades conforming to BS 6501, Part-1 : 2004 / ISO 10380 : 2003. The annular corrugated metallic hose body provided the flexibility and pressure tight core of the assembly. We also manufacture highly flexible close –pitch hoses for special applications. Stainless steel annular corrugated metallic flexible hose are offered from Size : 1/4"(DN 6) to 12"(DN 300).   Harsh Steel is manufacturing jacketed flexible hose assemblies. The Inner annular corrugated stainless steel flexible metallic hose conveys the fluid and jackets annular corrugated stainless steel flexible metallic hose for heating or coolant fluid or protective the hose and both Inner and jacketed hoses are highly flexible. We are using our annular corrugated stainless steel flexible metallic hoses ANSI 321 / 316L with ANSI 304 single wire braiding. We will provide both the end flange fittings swivel or fixed type and for inlet & outlet heating or cooling fluid end connection we will provide flange end or threaded end at an offset angle of 180°, Hoses conform to BS 6501, Part-1:2004 / ISO 10380:2003.   Advantages of Flexible Metal Hose : High physical strength combined with light weight. Suitable for wide temperature range (-200° C to + 550°C) Good corrosion resistance. Resistance to fire, moisture, abrasion and penetration. Absorbs vibration and noise from pumps, compressors, engines etc. Compensates for intermittent or constant movement. Compensates for thermal expansion of contraction of piping. Corrects problems of misalignment. A flexible and quick alternative for rigid piping in difficult locations. Industrial Gasket https://www.nickelalloys.in/industrial-gasket.htm https://www.nickelalloys.in/industrial-gasket.htm Fri, 11 Jan 2019 00:00:00 +0530 Industrial gaskets and sealing products are widely used throughout the mining, oil and gas, refining, electronic, pipeline, water treatment and petro-chemical industries including a wide range of general engineering applications. Harsh Steel manufactures and supplies variety of high quality industrial gaskets, produced with the latest technology in the manufacture of gaskets and seals. Harsh Steel Industrial gaskets product range:  Non-metallic gaskets : Flange gaskets made of compressed fibre sheets, graphite, PTFE , mica or elastomers PTFE enveloped gaskets Semi-metallic gaskets : Spiral wound gaskets Grooved (Camprofile) gaskets Corrugated metal gaskets Double jacketed gaskets Duplex Steel S31803/32205 https://www.nickelalloys.in/duplex-steel-s31803-32205.htm https://www.nickelalloys.in/duplex-steel-s31803-32205.htm Mon, 21 Jan 2019 00:00:00 +0530 Duplex Steel S31803/32205 combines improved resistance to stress corrosion cracking, pitting, crevice corrosion and high strength. Due to it's chemical composition F51 duplex stainless steel resists chloride environments and sulphide stress corrosion. Availability Duplex Steel S31803/32205 is available in Plate, Sheet, Round Bar, Flat Bar and Forging Stock for sizes contact us. Specifications ASTM A182 F51 / F60 ASTM A276 F51 / F60 ASTM A479 F51 AISI F51 BS 318S13 (Wrought) BS 332C15 (Cast) WS 1.4462 WS 1.4470 X2CrNiMoN22.5.3 AFNOR Z2CND22.05Az UNS S31803 UNS S32205 SAF2205 - SANMAC (Brand name) URANUS 45N (Brand name) FALC223 (Brand name) Super Duplex Steel S32760 https://www.nickelalloys.in/super-duplex-steel-s32760.htm https://www.nickelalloys.in/super-duplex-steel-s32760.htm Mon, 21 Jan 2019 00:00:00 +0530 Super Duplex Steel S32760 is the most common super duplex grade it has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types. AvailabilitySuper Duplex Steel S32760 is available in Bar from 6mm dia to 270mm dia and Forging Stock. For all stock availability of contact Sales. Specifications ASTM A182 F55 ASTM A276 F55 ASTM A479 F55 AISI F53 WS 1.4501 X2CrNiMoCuWN25.7.4 AFNOR Z3CND25.06Az EN10088-3 UNS S32760 ZERON 100 NACE MR01-75 PED 97/23/EC Stainless Steel 309 https://www.nickelalloys.in/stainless-steel-309.htm https://www.nickelalloys.in/stainless-steel-309.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless Steel Alloy 309 UNS 30900 / 30908 Werkstoff 1.4828 :Alloy 309 is an austenitic chromium-nickel stainless steel which has excellent heat-resisting properties. Alloy 309 has improved corrosion resistance and better creep strength than alloy 304. Alloy 309 is used in furnace parts, fire box sheets, high temperature containers and weld wire.Specifications : AMS 5523 Sheet / strip / plate AMS 5574 Seamless tube AMS 5650 Bar / tube / forgings AMS QQ-A-793 ASTM A276 / ASME SA276 ASTM A479 / ASME SA479 ASTM A484 / ASME SA484 ASTM A314 / ASME SA314 ASTM A580 / ASME SA580 BS 970; 309S24 Werkstoff 1.4828 AFNOR Z15CN24-13 UNS 30900 (309) UNS 30908 (309S) Stainless Steel 310 https://www.nickelalloys.in/stainless-steel-310.htm https://www.nickelalloys.in/stainless-steel-310.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless Steel 310 (AMS 5521 / AMS 5651) UNS S31000/S31008 Werkstoff 1.4842/1.4845:Alloy 310 is a austenitic chromium-nickel stainless steel. Alloy 310 is used where good corrosion and heat resistance are required. Alloy 310 has excellent oxidation resistance and can resist oxidation or scaling up to 2000°F. Due to this Alloy 310 is widely used for furnace applications.Specifications : AMS 5521 Sheet / strip / plate AMS 5572 Seamless tube AMS 5577 Welded tube AMS 5651 Bar / wire / forging QQ-S-763 ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A276 / ASME SA276 ASTM A479 / ASME SA479 ASTM A484 / ASME SA484 ASTM A176 / ASME SA176 BS 970; 310S24 Werkstoff 1.4842 Werkstoff 1.4845 AFNOR Z12CN25-20 UNS S31000 (310) UNS S31008 (310S) Stainless Steel 316 Ti https://www.nickelalloys.in/stainless-steel-316-ti.htm https://www.nickelalloys.in/stainless-steel-316-ti.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless steel 316TI round bars UNS S31635 WR. NO 1.4571 contain 10-14% nickel which is commonly used in various daily applications such as Refineries, Thermal pipe plants, Pharmaceutical industry, Oil Refineries, Textile Industries, Nuclear plants, Chemical Industries, Dairy Products, Power Plant, Food Products, Petrochemicals industry, Sugar industry, Engineering industry, Chemical industry. This alloy is also used to form springs, washers, screens and cables. Stainless steel 316TI bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Stainless steel 316TI round bars along in types of stainless steel 316TI bright round bars, Stainless steel 316TI hexagonal bars, stainless steel 316TI square bars, stainless steel 316TI hex bars, stainless steel 316TI flat bars, stainless steel 316TI threaded bars and stainless steel 316TI forged bars. All the stainless steel 316TI bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export stainless steel 316TI rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of stainless steel 316 bars we stock: Stainless steel 316 cold drawn & polished round, hex, square, threaded, forged bars Stainless steel 316 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Stainless steel 316 peeled and turned round, hex, square, threaded, forged bars Stainless steel 316 buffed round, hex, square, threaded, forged bars Stainless steel 316 chamfered round, hex, square, threaded, forged bars Stainless steel 316 solution annealed round, hex, square, threaded, forged bars Stainless steel 316 forged round, hex, square, threaded forged bars with annealed and aged condition Application of stainless steel 316 round bars:Food preparation equipment, especially in chloride environments, Chemical processing, equipment, Laboratory benches and equipment, Rubber, plastics, pulp & paper machinery, Pollution control equipment, Boat fittings, value and pump trim, Heat exchangers, Pharmaceutical and textile industries, Condensers, evaporators and tanks. Stainless Steel 321 https://www.nickelalloys.in/stainless-steel-321.htm https://www.nickelalloys.in/stainless-steel-321.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless Steel 321 is available in Capillary tube, Instrument tube, Precision tube and Hydraulic tube. On request Stainless Steel 321 can also be supplied in Coiled Tube with a seamless and welded execution.Stainless Steel 321 Capillary tube can be either harddrawn (hardness 260-330 HV) or annealed (hardness 180 HV). The tolerances are according to DIN 17458/ISO 1127 D4/T3. We can also supply Welded/ Redrawn (in the same conditions).Capillary tubes can be supplied with various point styles : Blunt end - square cut /Chamfered edge / Radiused/ Tapered. Flat ground-point, Back cut bevel, Lancet level, Closed round end, Flared end and Threaded endSpecifications : AMS 5510 Sheet / strip / plate AMS 5557 Welded/seamless tube AMS 5559 Welded / thin wall tube AMS 5570 Seamless tube AMS 5576 Welded tube AMS 5645 Bars / wire / forging MIL-S-6721 MIL-T-8606 Seamless tube MIL-T-8606 Welded tube MIL-T-8808 Seamless tube MIL-T-8808 Welded tube QQ-S-766 ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A193 Grade B8T CL1 ASTM A276 / ASME SA276 ASTM A314 / ASME SA314 ASTM A320 Grade B8T ASTM A479 / ASME A479 ASTM A484 / ASME SA484 AISI 321 BS 2S129 BS T67 Tube BS S524 Sheet BS S526 Sheet BS 970; 321S31 EN58B Werkstoff 1.4541 Z10CnNb18-11 Stainless Steel 330 https://www.nickelalloys.in/stainless-steel-330.htm https://www.nickelalloys.in/stainless-steel-330.htm Fri, 18 Jan 2019 00:00:00 +0530 Alloy 330/Stainless Steel 330 UNS N08330 Werkstoff 1.4886 :Alloy 330 is an austenitic heat and corrosion resisting alloy which has an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Alloy 330 is used in a wide range of applications in high temperature industrial environments. Stainless Steel 347 https://www.nickelalloys.in/stainless-steel-347.htm https://www.nickelalloys.in/stainless-steel-347.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless Steel 347 (AMS 5512/AMS 5646) UNS S30347 Werkstoff 1.4544/1.4546/1.4550 :Alloy 347 is a chromium nickel stainless steel which has been modified by the addition of columbium and tantalum. The main advantage of this is an excellent resistance to intergranular corrosion which is common to other austenitic stainless steels following exposure to temperatures of 800° to 1500°F. Type 347 has about the same general corrosion resistance as Type 302.Type 347 is generally used where corrosive conditions are severe, such as harsh steel exhaust stacks, manifolds and ring collectors. Type 347 is also used for heavy welded assemblies which cannot be annealed after welding or where the operating conditions cause exposure within the temperature range between 800° to 1500°F.Specifications : 347 / 347H AMS 5512 Sheet / strip / plate AMS 5556 Seamless/ welded tube AMS 5558 Welded /thin wall tube AMS 5571 Seamless tube AMS 5575 Welded tube AMS 5646 Bars / wire / forging AMS 5654 Bars (harsh steel quality) AMS 5674 Wire AMS 5680 Wire QQ-S-763 MIL-T-6737 MIL-T-8606 Seamless tube MIL-T-8606 Welded tube MIL-T-8808 Seamless tube MIL-T-8808 Welded tube MIL-S-6721 ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A276 / ASME SA276 ASTM A314 / ASME SA314 ASTM A479 / ASME A479 BS 2S130 BS 2T66 Tube BS T72 Tube BS S527 Sheet BS 970; 347S17 EN58F / EN58G MSRR 6522 MSRR 6524 Werkstoff 1.4544 Werkstoff 1.4546 Werkstoff 1.4550 Werkstoff 1.5446*Tube AFNOR Z6CNNb18-11 UNS S30347 Stainless Steel 410 https://www.nickelalloys.in/stainless-steel-410.htm https://www.nickelalloys.in/stainless-steel-410.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless Steel 410 (AMS 5504) UNS S41000:Type 410 is a basic hardenable martensitic stainless steel and is well suited for use in highly stressed parts where properties such as corrosion resistance, good strength and ductility are required. 410 is used for steam / gas turbine blades and buckets, bushings, valve components, fasteners, nuclear reactor control rod mechanisms, petrochemical equipment and machine parts.Resisitance to oxidation and corrosion - Alloy 410 exhibits good corrosion resistance to atmospheric corrosion, potable water, food acids and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects the surfaces from further attack.Specifications ;Type 410 Stainless Steel is covered by the following specifications: AMS 5504 Sheet / strip / plate AMS 5505 Sheet / strip / plate (Mod) AMS 5591 Seamless tube AMS 5609 Bars / wire AMS 5611 Bars / wire / forging AMS 5612 (51410 Modified) Bar, Wire, Forgings, Tubing and Rings AMS 5613 Bars / wire / forging AMS 5614 Bars / wire / forging QQ-S-763, QQ-S-766 ASTM A176 / ASME SA176 ASTM A240 / ASME SA240 ASTM A276 / ASME SA276 ASTM A479 / ASME A479 ASTM A493 / ASME SA493 ASTM A580 / ASME SA580 ASTM F899, UNS S41000 Stainless Steel 904L https://www.nickelalloys.in/stainless-steel-904l.htm https://www.nickelalloys.in/stainless-steel-904l.htm Fri, 18 Jan 2019 00:00:00 +0530 Alloy 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. Very good resistance to pitting corrosion, stress corrosion cracking and a much better resistance to crevice corrosion than steels of alloy 304L and alloy 316L. Used for chemical processing, pollution control equipment, oil and gas well piping, heat exchangers, acid production and pickling equipment.Specifications Werkstoff 1.4539 AFNOR Z2CNDU 25-20 UNS N08904 AvailabilityAlloy 904L is available in Instrument tube, Precision tube and Hydraulic tube. On request Alloy 904L Coiled Tube can be supplied with a stainless steel seamless and welded execution. For all stock availability of contact Sales. Nimonic 75 https://www.nickelalloys.in/nimonic-75.htm https://www.nickelalloys.in/nimonic-75.htm Mon, 21 Jan 2019 00:00:00 +0530 Nimonic Alloy 75 round bars UNS S06075 WR. NO 2.4951 contain Chromium 18.00-21.00% Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.5% max, titanium 02-06% which is commonly used in various daily applications such as sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering. Nimonic Alloy 75 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 75 round bars along in types of Nimonic Alloy 75 bright round bars, Nimonic Alloy 75 hexagonal bars, Nimonic Alloy 75 square bars, Nimonic Alloy 75 hex bars, Nimonic Alloy 75 flat bars, Nimonic Alloy 75 threaded bars and Nimonic Alloy 75 forged bars. All the Nimonic Alloy 75 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 75 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Nimonic Alloy 75 bars we stock: Nimonic Alloy 75 cold drawn & polished round, hex, square, threaded, forged bars Nimonic Alloy 75 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Nimonic Alloy 75 peeled and turned round, hex, square, threaded, forged bars Nimonic Alloy 75 buffed round, hex, square, threaded, forged bars Nimonic Alloy 75 chamfered round, hex, square, threaded, forged bars Nimonic Alloy 75 solution annealed round, hex, square, threaded, forged bars Nimonic Alloy 75 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Nimonic Alloy 75 round bars:Sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures, gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering. Nimonic 90 https://www.nickelalloys.in/nimonic-90.htm https://www.nickelalloys.in/nimonic-90.htm Mon, 21 Jan 2019 00:00:00 +0530 Nimonic Alloy 90 round bars UNS S07090 WR. NO 2.4632 contain Chromium 18.00-21.00%, Manganese 1.00% max, Nickel balance, Silicon 1.00% max, Carbon 0.2% max, Zirconium0.15% maximum which is commonly used in various daily applications such as turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs. Nimonic Alloy 90 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Nimonic Alloy 90 round bars along in types of Nimonic Alloy 90 bright round bars, Nimonic Alloy 90 hexagonal bars, Nimonic Alloy 90 square bars, Nimonic Alloy 90 hex bars, Nimonic Alloy 90 flat bars, Nimonic Alloy 90 threaded bars and Nimonic Alloy 90 forged bars. All the Nimonic Alloy 90 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export Nimonic Alloy 90 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Nimonic Alloy 90 bars we stock: Nimonic Alloy 90 cold drawn & polished round, hex, square, threaded, forged bars Nimonic Alloy 90 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Nimonic Alloy 90 peeled and turned round, hex, square, threaded, forged bars Nimonic Alloy 90 buffed round, hex, square, threaded, forged bars Nimonic Alloy 90 chamfered round, hex, square, threaded, forged bars Nimonic Alloy 90 solution annealed round, hex, square, threaded, forged bars Nimonic Alloy 90 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Nimonic Alloy 90 round bars:Turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs. Monel K500 https://www.nickelalloys.in/monel-k500.htm https://www.nickelalloys.in/monel-k500.htm Mon, 21 Jan 2019 00:00:00 +0530 Monel Alloy K500 round bars UNS S05500 WR. NO 2.4375 contain Titanium 0.35-0.85%, Manganese 1.5% max, Nickel 63.0-70.0%, Silicon 0.50% max, Carbon 0.25% max, Aluminium 2.30-3.15% which is commonly used in various daily applications such as Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Monel Alloy K500 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy K500 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy K500 round bars along in types of Monel Alloy K500 bright round bars, Monel Alloy K500 hexagonal bars, Monel Alloy K500 square bars, Monel Alloy K500 hex bars, Monel Alloy K500 flat bars, Monel Alloy K500 threaded bars and Monel Alloy K500 forged bars. All the Monel Alloy K500 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Monel Alloy K500 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Monel Alloy K500 bars we stock: Monel Alloy K500 cold drawn & polished round, hex, square, threaded, forged bars Monel Alloy K500 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Monel Alloy K500 peeled and turned round, hex, square, threaded, forged bars Monel Alloy K500 buffed round, hex, square, threaded, forged bars Monel Alloy K500 chamfered round, hex, square, threaded, forged bars Monel Alloy K500 solution annealed round, hex, square, threaded, forged bars Monel Alloy K500 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Monel Alloy K500 round bars:Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Alloy A286 https://www.nickelalloys.in/alloy-a286.htm https://www.nickelalloys.in/alloy-a286.htm Mon, 21 Jan 2019 00:00:00 +0530 Alloy A286 round bars UNS S66286 EN 1.4980 contain Chromium 13.5-16.0%, Manganese 2.0% max, Nickel 24.0-27.0%, Silicon 1.0% max, Carbon 0.08% max, Aluminium 0.35% maximum which is commonly used in various daily applications such as Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment. Alloy A286 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Alloy A286 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Alloy A286 round bars along in types of Alloy A286 bright round bars, Alloy A286 hexagonal bars, Alloy A286 square bars, Alloy A286 hex bars, Alloy A286 flat bars, Alloy A286 threaded bars and Alloy A286 forged bars. All the Alloy A286 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Alloy A286 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Alloy A286 bars we stock: Alloy A286 cold drawn & polished round, hex, square, threaded, forged bars Alloy A286 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Alloy A286 peeled and turned round, hex, square, threaded, forged bars Alloy A286 buffed round, hex, square, threaded, forged bars Alloy A286 chamfered round, hex, square, threaded, forged bars Alloy A286 solution annealed round, hex, square, threaded, forged bars Alloy A286 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Alloy A286 round bars:Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment. Nickel 200 https://www.nickelalloys.in/nickel-200.htm https://www.nickelalloys.in/nickel-200.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 200/UNS N02200 is available in Nickel Alloy 200 wire, Nickel Alloy 200 Round bar, Nickel Alloy 200 Forged bar, Nickel Alloy 200 hex bar, Nickel Alloy 200 Flat bar, Nickel Alloy 200 Circles, Nickel Alloy 200 Ring, Nickel Alloy 200 Tube, Nickel Alloy 200 seamless Pipe, Nickel Alloy 200 Welded / ERW Pipe, Nickel Alloy 200 Sheet, Nickel Alloy 200 Plate, Nickel Alloy 200 Coil, Nickel Alloy 200 Flanges, Nickel Alloy 200 fasteners, Nickel Alloy 200 Socket weld Fittings, Nickel Alloy 200 ferrule fittings, Nickel Alloy 200 Buttweld fittings Like cap, elbow, tee, Reducer.Nickel Alloy 200 and Nickel Alloy 201 is solid solution strengthened, in a commercial sense pure wrought materials together with good mechanized properties in excess of a variety of temperature ranges and superb level of resistance to a lot of corrosives, specifically hydroxides. Nickel Alloy 201 ended up being a modification of 200 to overpower carbon and (. 02 max) which keeps this coming from becoming embrittled through intergranular precipitates at temperature ranges of 600° F to 1400° F in lots of procedures. Normally, your essential constraints of both equally, nickel 200 and nickel 201, are usually blended into just one, dual-certified chemistry resulting providing a one metal while using desired attributes of both equally precious metals, Nickel Alloy 200/201.Nickel Alloy 200 and 201 deliver corrosion amount of resistance within lowering and simple advertising together with within oxidizing atmospheres provided that the actual oxidizing advertising makes it possible for the actual formation of a passive oxide film. This oxide film makes up about the actual components exceptional amount of resistance within caustic environments. Deterioration prices within both equally marine and rural atmospheres are incredibly low. The amount of resistance connected with Nickel Alloy 200 and 201 to be able to corrosion by distilled and normal seas is very useful. And yes it likewise offers exceptional support within going sea water actually at excessive pace, but in at standstill as well as very low-velocity sea water severe local episode may occur beneath fouling microorganisms as well as different remains. Within warm water devices in which the water is made up of fractional carbon and atmosphere using some size, corrosion prices will probably be at first excessive however will minimize eventually when conditions favor the actual formation of a protective film.Nickel Alloy 200 is generally on a support at temps below 600° F. At increased temps Nickel Alloy 200 merchandise may have problems with graphitization which can result in severely compromised properties. Whenever functioning temps are hoped for to be able to exceed 600° F, carbon written content gets to be critical. The lower carbon written content connected with Nickel Alloy 201 tends to make the actual materials repellent to be able to graphitization and as a consequence fewer at the mercy of embrittlement. Nickel Alloy 200/201 are generally accepted with regard to structure connected with strain wrecks and elements beneath ASME Boiler and Pressure . Nickel Alloy 200 is usually accepted with regard to support up to 600° F though Nickel Alloy 201 is usually accepted with regard to support up to 1230° F. Reduction point is usually 2615-2635° F.In what forms is Nickel Alloy 200/201 available at Harsh Steel? Nickel Alloy 200 Sheet Nickel Alloy 200 Plate Nickel Alloy 200 Bar Nickel Alloy 200 Pipe & Tube (welded & seamless) Nickel Alloy 200 Fittings (i.e. flanges, slip-ons, blinds, weld necks, lapjoints, long welding necks,socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Nickel Alloy 200 Wire What are the characteristics of Nickel Alloy 200/201?Highly resistant to various reducing chemicals Excellent resistance to caustic alkalies High electrical conductivity Excellent corrosion resistance to distilled and natural waters Resistance to neutral and alkaline salt solutions Excellent resistance to dry fluorine Widely used to handle caustic soda Good thermal, electrical and magnetostrictive properties Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations Nickel 201 https://www.nickelalloys.in/nickel-201.htm https://www.nickelalloys.in/nickel-201.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 201 (UNS N02201) is available in Nickel Alloy 201 wire, Nickel Alloy 201 Round bar, Nickel Alloy 201 Forged bar, Nickel Alloy 201 hex bar, Nickel Alloy 201 Flat bar, Nickel Alloy 201 Circles, Nickel Alloy 201 Ring, Nickel Alloy 201 Tube, Nickel Alloy 201 seamless Pipe, Nickel Alloy 201 Welded / ERW Pipe, Nickel Alloy 201 Sheet, Nickel Alloy 201 Plate, Nickel Alloy 201 Coil, Nickel Alloy 201 Flanges, Nickel Alloy 201 fasteners, Nickel Alloy 201 Socket weld Fittings, Nickel Alloy 201 ferrule fittings, Nickel Alloy 201 Buttweld fittings Like cap, elbow, tee, Reducer.Nickel Alloy 200 and Nickel Alloy 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel Alloy 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel Alloy 200/201.Nickel Alloy 200 and 201 deliver corrosion amount of resistance within lowering and simple advertising together with within oxidizing atmospheres provided that the actual oxidizing advertising makes it possible for the actual formation of a passive oxide film. This oxide film makes up about the actual components exceptional amount of resistance within caustic environments. Deterioration prices within both equally marine and rural atmospheres are incredibly low. The amount of resistance connected with Nickel Alloy 200 and 201 to be able to corrosion by distilled and normal seas is very useful. And yes it likewise offers exceptional support within going sea water actually at excessive pace, but in at standstill as well as very low-velocity sea water severe local episode may occur beneath fouling microorganisms as well as different remains. Within warm water devices in which the water is made up of fractional carbon and atmosphere using some size, corrosion prices will probably be at first excessive however will minimize eventually when conditions favor the actual formation of a protective film.Nickel Alloy 200 hundred is generally on a support at temps below 600° F. At increased temps Nickel Alloy 200 hundred merchandise may have problems with graphitization which can result in severely compromised properties. Whenever functioning temps are hoped for to be able to exceed 600° F, carbon written content gets to be critical. The lower carbon written content connected with Nickel Alloy 201 tends to make the actual materials repellent to be able to graphitization and as a consequence fewer at the mercy of embrittlement. Nickel Alloy 200/201 are generally accepted with regard to structure connected with strain wrecks and elements beneath ASME Boiler and Pressure . Nickel Alloy 200 is usually accepted with regard to support up to 600° F though Nickel Alloy 201 is usually accepted with regard to support up to 1230° F. Reduction point is usually 2615-2635° F.Nickel Alloy-201 (UNS N02201) is a commercially pure wrought nickel, with good mechanical properties and an excellent resistance to many corrosives. Nickel Alloy 201 has low carbon (0.02% max) for applications over 315°C it is mainly used for food processing equipment, chemical shipping drums, caustic handling equipment and piping, electronic parts, aerospace and missile components, rocket motor cases, magnetostrictive devices.In what forms is Nickel Alloy 200/201 available at Harsh Steel? Nickel Alloy 201 Sheet Nickel Alloy 201 Plate Nickel Alloy 201 Bar Nickel Alloy 201 Pipe & Tube (welded & seamless) Nickel Alloy 201 Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks,socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Nickel Alloy 201 Wire What are the characteristics of Nickel Alloy 200/201? Highly resistant to various reducing chemicals Excellent resistance to caustic alkalies High electrical conductivity Excellent corrosion resistance to distilled and natural waters Resistance to neutral and alkaline salt solutions Excellent resistance to dry fluorine Widely used to handle caustic soda Good thermal, electrical and magnetostrictive properties Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations Inconel 600 https://www.nickelalloys.in/inconel-600.htm https://www.nickelalloys.in/inconel-600.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 600 is available in Nickel Alloy 600 wire, Nickel 600 Round bar, Nickel 600 Forged bar, Nickel 600 hex bar, Nickel 600 Flat bar, Nickel 600 Circles, Nickel 600 Ring, Nickel 600 Tube, Nickel 600 seamless Pipe, Nickel 600 Welded / ERW Pipe, Nicke 600 Sheet, Nickel 600 Plate, Nickel 600 Coil, Nickel 600 Flanges, Nickel 600 fasteners, Nickel 600 Socket weld Fittings, Nickel 600 ferrule fittings, Nickel 600 Buttweld fittings Like cap, elbow, tee, Reducer.Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy had been created for service temperatures via cryogenic to raised conditions within the choice of 2000° F. It's non-magnetic, has excellent physical qualities and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 makes it possible for the idea to hold on to extensive resistance beneath decreasing circumstances, causes it to become immune to deterioration by means of a number of natural and organic and inorganic compounds, presents the idea excellent resistance to chloride-ion stress-corrosion great plus offers excellent resistance to alkaline remedies. Normal programs of the dime mix add some chemical, pulp and paper, aerospace, nuclear anatomist and high temperature healing industries.Nickel Alloy 600 (N06600) is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water, and caustic corrosion. Alloy 600 also has excellent mechanical properties and has a desirable combination of high strength and good workability. Used for furnace components, in chemical and food processing, in nuclear engineering and for the sparking electrodes.In what form is Inconel 600 Available at Harsh Steel? Inconel 600 Sheet Inconel 600 Plate Inconel 600 Bar Inconel 600 Pipe & Tube (welded & seamless) Inconel 600 Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds,elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Inconel 600 Wire What are the characteristics of Inconel 600? Resistant to a wide range of corrosive media. Virtually immune to chlorine ion stress corrosion cracking Non-magnetic Excellent mechanical properties High strength and good weldability under a wide range of temperatures Specifications UNS N06600 W. Nr 2.4816 AMS 5540 Sheet, Strip and Plate AMS 5665 Bar, Forgings and Rings AMS 5580 Seamless Tubing ASTM B168 Plate ASTM B166 Bar ASTM B167 Seamless Pipe ASTM B163 Seamless Tube ASTM B517 Weld Pipe ASTM B516 Weld Tube ASTM B564 Forging MIL N 22986 MIL N 23338 MIL N 6710 QQ W 390 MIL N 15721 MIL N 22987 MIL N 23229 MIL N 6840 NA14 Inconel 600 Inconel 625 https://www.nickelalloys.in/inconel-625.htm https://www.nickelalloys.in/inconel-625.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy 625 (UNS N06625) is available in Inconel 625 wire, Inconel 625 Round bar, Inconel 625 Forged bar, Inconel 625 hex bar, Inconel 625 Flat bar, Inconel 625 Circles, Inconel 625 Ring, Inconel 625 Tube, Inconel 625 seamless Pipe, Inconel 625 Welded / ERW Pipe, Inconel 625 Sheet, Inconel 625 Plate, Inconel 625 Coil, Inconel 625 Flanges, Inconel 625 fasteners, Inconel 625 Socket weld Fittings, Inconel 625 ferrule fittings, Inconel 625 Buttweld fittings Like cap, elbow, tee, Reducer.Inconel 625 is a consumption and oxidation safe nickel alloy that is utilized both for its high quality and remarkable aqueous erosion safety. Its outstanding quality and durability is because of the expansion of niobium which acts with the molybdenum to solidify the composite's network. Alloy 625 has excellent quality and anxiety consumption splitting resistance to chloride particles. This nickel alloy has superb weldability and is often used to weld AL-6xn. This alloy resists an extensive variety of seriously destructive situations and is especially resistant to setting and hole consumption. Some normal applications Inconel 625 is utilized within are synthetic preparing, aerospace and marine designing, contamination control equipment, and nuclear reactors.Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.In what form is Inconel 625 available at Harsh Steel? Inconel 625 Sheet Inconel 625 Plate Inconel 625 Bar Inconel 625 Pipe & Tube (welded & seamless) Inconel 625 Wire What are the characteristics of Inconel 625? High creep-rupture strength Oxidation resistant to 1800° F Seawater pitting and crevice corrosion resistant Immune to chloride ion stress corrosion cracking Non-magnetic Inconel 718 https://www.nickelalloys.in/inconel-718.htm https://www.nickelalloys.in/inconel-718.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 718 (UNS N07718) is available in Inconel 718 wire, Inconel 718 Round bar, Inconel 718 Forged bar, Inconel 718 hex bar, Inconel 718 Flat bar, Inconel 718 Circles, Inconel 718 Ring, Inconel 718 Tube, Inconel 718 Seamless Pipe, Inconel 718 Welded / ERW Pipe, Inconel 718 Sheet, Inconel 718 Plate, Inconel 718 Coil, Inconel 718 Flanges, Inconel 718 fasteners, Inconel 718 Socket weld Fittings, Inconel 718 ferrule fittings, Inconel 718 Buttweld fittings Like cap, elbow, tee, Reducer.Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718's composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy's matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.In what forms is Alloy 718 (UNS N07718, W Nr 2.4668) is an austenitic nickel-based superalloy. Alloy 718 exhibits excellent high yield tensile and creep-rupture properties at temperatures up to 1300ºF and oxidation resistance to 1800ºF. Alloy 718 is used in applications that require high strength such as parts for jet engines and high speed airframe parts such as wheels, buckets, spacers and high temperature bolts and fasteners.Inconel 718 Available at Harsh Steel? Inconel 718 Sheet Inconel 718 Plate Inconel 718 Bar Inconel 718 Wire What are the characteristics of Inconel 718? Good mechanical properties – tensile, fatigue and creep-rupture Yield tensile strength, creep, and rupture strength properties are exceedingly high Highly resistant to chloride and sulfide stress corrosion cracking Resistant to aqueous corrosion and chloride ion stress corrosion cracking High temperature resistant Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking. Excellent welding characteristics, resistant to postweld age cracking Typical Mechanical PropertiesThere are two main types of solution annealed and aging treatments: Solution Treatment (AMS 5662 Bar / AMS 5596 Sheet): 1725°F - 1850°F + Air Cool. Heat Treatment (AMS 5663 Bar) : 1325°F for 8 hrs, cooling 100°F/hr to 1150°F, hold at 1150°F for 8hrs min, + Air Cool. This treatment gives the highest room temperature tensile and yield strengths as well as producing the highest fatigue strength. It is the optimum heat treatment for Alloy 718 where a combination of rupture life, notch rupture life and rupture ductility is required. Alternative Solution Treatment (AMS 5664 Bar / AMS 5597 Sheet): 1900°F - 1950°F + Air Cool Heat Treatment: 1400°F for 10hrs, furnace cool to 1200°F, hold at 1200°F for a total aging time of 20 hrs + Air Cool. This is the prefered treatment in tensile-limited applications as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength. However, this treatment has a tendency to produce notch brittleness in stress rupture. Specifications UNS N07718 Werkstoff Nr 2.4668 AMS 5596 Sheet, Strip and Plate AMS 5597 Sheet, Strip and Plate AMS 5589 Seamless Tube AMS 5590 Seamless Tube AMS 5662 Bars, Forgings and Rings AMS 5663 Bars, Forgings and Rings AMS 5664 Bars, Forgings and Rings AMS 5832 Welding Wire ASTM B637 Forgings ASTM B670 Plate, Sheet and Strip AFNOR NC 19 Fe Nb, MSRR 7115 and MSRR 7116 Inconel 718 Inconel 738LC https://www.nickelalloys.in/inconel-738lc.htm https://www.nickelalloys.in/inconel-738lc.htm Mon, 21 Jan 2019 00:00:00 +0530 Inconel Alloy 738/738LC round bars contain Chromium 15.70-16.30% Manganese 0.20% max, Silicon 0.30% max, Carbon 0.15-0.20%, Aluminium and titanium 6.50-7.20% which is commonly used in various daily applications such as Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc. Alloy 738/738LC in the annealed condition can be strengthened further by relatively low temperature heat treatment. Inconel Alloy 738/738LC bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Inconel Alloy 738/738LC round bars along in types of Inconel Alloy 738/738LC bright round bars, Inconel Alloy 738/738LC hexagonal bars, Inconel Alloy 738/738LC square bars, Inconel Alloy 738/738LC hex bars, Inconel Alloy 738/738LC flat bars, Inconel Alloy 738/738LC threaded bars and Inconel Alloy 738/738LC forged bars. All the Inconel Alloy 738/738LC bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Inconel Alloy 738/738LC rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Inconel Alloy 738/738LC bars we stock: Inconel Alloy 738/738LC cold drawn & polished round, hex, square, threaded, forged bars Inconel Alloy 738/738LC cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Inconel Alloy 738/738LC peeled and turned round, hex, square, threaded, forged bars Inconel Alloy 738/738LC buffed round, hex, square, threaded, forged bars Inconel Alloy 738/738LC chamfered round, hex, square, threaded, forged bars Inconel Alloy 738/738LC solution annealed round, hex, square, threaded, forged bars Inconel Alloy 738/738LC forged round, hex, square, threaded forged bars with annealed and aged condition Application of Inconel Alloy 738/738LC round bars:Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc. Inconel X750 https://www.nickelalloys.in/inconel-x750.htm https://www.nickelalloys.in/inconel-x750.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel Alloy X-750/UNS N07752 is available in Inconel X-750 wire, Inconel X-750 Round bar, Inconel X-750 Forged bar, Inconel X-750 hex bar, Inconel X-750 Flat bar, Inconel X-750 Circles, Inconel X-750 Ring, Inconel X-750 Tube, Inconel X-750 seamless Pipe, Inconel X-750 Welded / ERW Pipe, Inconel X-750 Sheet, Inconel X-750 Plate, Inconel X-750 Coil, Inconel X-750 Flanges, Inconel X-750 fasteners, Inconel X-750 Socket weld Fittings, Inconel X-750 ferrule fittings, Inconel X-750 Buttweld fittings Like cap, elbow, tee, Reducer.Inconel X-750 is a nickel-chromium alloy which has been made precipitation-hardenable by the increments of aluminum and titanium. Inconel X-750 has great resistance to erosion and oxidation along high tensile and creep break properties at temperature up to 1300ºf (700ºc). Because of X-750's great unwinding safety it is helpful for applications as high-temperature springs and fasteners, X-750 is likewise utilized as a part of gas turbines, rocket engines, atomic reactors, weight vessels, tooling and airplane structure.Sheet, Strip and Plate are available with the following heat treatments AMS 5542 - 1300°F/20hr, AC (Constant-temperature precipitation treatment). AMS 5542 has high strength up to 1300°F AMS 5598 - 1350°F/8hr, FC to 1150°F, hold at 1150°F for total precipitation-treating time of 18hr, AC (furnace-cool precipitation treatment. AMS 5598 has high strength up to 1300°F (Increased tensile properties to about 1100°F). With heat treatment 1400°F/1hr, FC to 1150°F hold at 1150°F for total time of 6hr, AC (short furnace-cool precipitation treatment). UNS N07752 is available in billet for forging. UNS N07752 has limits on the Carbon and Cobalt levels (each has a maximum of 0.05%). Inconel 800/H/HT https://www.nickelalloys.in/inconel-800-h-ht.htm https://www.nickelalloys.in/inconel-800-h-ht.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 800 is available in Incoloy Alloy 800 / 800H/ 800HT wire, Incoloy Alloy 800 / 800H/ 800HT Round bar, Incoloy Alloy 800 / 800H/ 800HT Forged bar, Incoloy Alloy 800 / 800H/ 800HT hex bar, Incoloy Alloy 800 / 800H/ 800HT Flat bar, Incoloy Alloy 800 / 800H/ 800HT Circles, Incoloy Alloy 800 / 800H/ 800HT Ring, Incoloy Alloy 800 / 800H/ 800HT Tube, Incoloy Alloy 800 / 800H/ 800HT seamless Pipe, Incoloy Alloy 800 / 800H/ 800HT Welded / ERW Pipe, Incoloy Alloy 800 / 800H/ 800HT Sheet, Incoloy Alloy 800 / 800H/ 800HT Plate, Incoloy Alloy 800 / 800H/ 800HT Coil, Incoloy Alloy 800 / 800H/ 800HT Flanges, Incoloy Alloy 800 / 800H/ 800HT fasteners, Incoloy Alloy 800 / 800H/ 800HT Socket weld Fittings, Incoloy Alloy 800 / 800H/ 800HTferrule fittings, Incoloy Alloy 800 / 800H/ 800HT Buttweld fittings Like cap, elbow, tee, Reducer.Incoloy 800, 800h, and 800ht are nickel-iron-chromium alloys with great quality and incredible resistance to oxidation and carburization in high-temperature presentation. These nickel steel alloys are identical with the exception of the more elevated amount of carbon in composite 800h, and the expansion of up to 1.20 percent aluminum and titanium in compound 800ht. Incoloy 800 was the first of these alloy and it was somewhat altered into Incoloy 800h. This adjustment was to control carbon (.05-.10%) and grain size to advance anxiety burst properties. Incoloy 800ht has further alterations to the joined titanium and aluminum levels (.85-1.20%) to guarantee ideal high temperature properties.the nickel compound is double confirmed (800h/HT) and joins together the properties of both forms. incoloy 800h/HT alloy was proposed for high temperature structural applications. The nickel substance makes the alloy very impervious to both chloride stress-consumption breaking and to embrittlement from precipitation of sigma stage. The general corrosion resistance is superb. In the result tempered condition, alloys 800h and 800ht have unrivaled crawl and anxiety break properties. Today, most suppliers, including Harsh steel, just convey the dual certified 800h/HT compound.Incoloy 800 is principally utilized within applications with temperatures up to 1100° F, where alloys 800h and 800ht are ordinarily utilized as a part of temperatures above 1100° F where resistance to crawl and burst is needed. The compound equalization permits the nickel steel alloy to show fabulous resistance to carburization, oxidation and nitriding climates. Incoloy 800ht won't get to be embrittled much after long times of use in the 1200-1600° F range where numerous stainless steels get to be fragile.Excellent cold structuring qualities ordinarily connected with the nickel-chromium alloys are displayed with 800ht. At the point when frosty framed widely the grain size delivers an obviously undulated surface called "orange peel". Incoloy 800ht could be welded by the regular methods utilized on stainless steels.In what forms is Incoloy® 800H/HT available at Harsh Steel? Incoloy Alloy 800 / 800H/ 800HT Sheet Incoloy Alloy 800 / 800H/ 800HT Plate Incoloy Alloy 800 / 800H/ 800HT Bar Incoloy Alloy 800 / 800H/ 800HT Pipe & Tube (welded & seamless) Incoloy Alloy 800 / 800H/ 800HT Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds,elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Incoloy Alloy 800 / 800H/ 800HT Wire What are the characteristics of Incoloy 800H/HT? High temperature strength High creep rupture strength Resistant to oxidation and carburization in high temperature environments Good corrosion resistance in many acidic environments Good resistance to many sulfur-containing atmospheres Alloy 800 - The 800 series of alloy (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.Specifications Alloy 800 - UNS N08800 Alloy 800H - UNS N08810 Alloy 800HT - UNS N08811 Inconel 825 https://www.nickelalloys.in/inconel-825.htm https://www.nickelalloys.in/inconel-825.htm Mon, 21 Jan 2019 00:00:00 +0530 At Harsh Steel Nickel 825 is available in Incoloy 825 wire, Incoloy 825 Round bar, Incoloy 825 Forged bar, Incoloy 825 hex bar, Incoloy 825 Flat bar, Incoloy 825 Circles, Incoloy 825 Ring, Incoloy 825 Tube, Incoloy 825 seamless Pipe, Incoloy 825 Welded / ERW Pipe, Incoloy 825 Sheet, Incoloy 825 Plate, Incoloy 825 Coil, Incoloy 825 Flanges, Incoloy 825 fasteners, Incoloy 825 Socket weld Fittings, Incoloy 825 ferrule fittings, Incoloy 825 Buttweld fittings Like cap, elbow, tee, Reducer.Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.Alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localised attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulphuric and phosphoric acid. Alloy 825 is used for chemical processing, pollution control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production and pickling equipment and handling of radioactive wastes.In what forms is Incoloy 825 available at Harsh Steel? Nickel Alloy 825 Sheet Nickel Alloy 825 Plate Nickel Alloy 825 Bar Nickel Alloy 825 Pipe & Tube (welded & seamless) Nickel Alloy 825 Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks,socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) Nickel Alloy 825 Wire What are the characteristics of Incoloy 825? Excellent resistance to reducing and oxidizing acids Good resistance to stress-corrosion cracking Satisfactory resistance to localized attack like pitting and crevice corrosion Very resistant to sulfuric and phosphoric acids Good mechanical properties at both room and elevated temperatures up to approximately 1020° F Permission for pressure-vessel use at wall temperatures up to 800°F Specifications Nickel Alloy 825 Sheet, Strip and Plate BS3072 NA16 BS 3073 NA16 ASTM B 424 ASTM B 906 ASME SB 424 ASME SB 906 DIN 17750 VdTUV 432 Nickel Alloy 825 Pipe and Tube BS 3074 NA16 ASTM B163, ASME SB 163 ASTM B 423, ASME SB 423 ASTM B704, ASME SB 704 ASTM B 705, ASME SB 705 ASTM B 751, ASME SB 751 ASTM B 755, ASME SB 755 ASTM B 829, ASME SB 829 DIN 17751, VdTUV 432 Nickel Alloy 825 Rod, Bars, Forgings BS 3076 NA16 ASTM B 425 ASTM B 564 ASME SB 425 ASME SB 564 ASME Code Case N-572 DIN 17752, DIN 17753, DIN 17754 VdTUV 432 Other Similar Specifications ASTM B366 ASME SB 366 DIN 17744 Contact Sales for stock availability. Maraging 250 https://www.nickelalloys.in/maraging-250.htm https://www.nickelalloys.in/maraging-250.htm Mon, 21 Jan 2019 00:00:00 +0530 Alloy 250 (UNS K92890 / Maraging 250) is an age-hardenable iron-nickel steel. Alloy 250 combines ultra-high strength (1800MPa), good toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation. C250 is used for missile and ejector systems, slat tracks and drive shafts. Specifications UNS K92890 AMS 6512 Bar and Forging Stock Werkstoff Nr. 1.6359 MIL-S-46850 BS S162 DTD 5212 MSRR 6551 MAT 102 MIA 101 Udimar 250 Vascomax C250 Maraging 300 https://www.nickelalloys.in/maraging-300.htm https://www.nickelalloys.in/maraging-300.htm Mon, 21 Jan 2019 00:00:00 +0530 Maraging 300 is an age hardenable (maraging) iron nickel stainless steel. Maraging 300 has exceptional strength, toughness and is resistant to crack propagation. Maraging 300 is used for tooling, transmission shafts, autosport components and light aircraft landing gear. Specifications UNS K93120 ASTM A579 SAE AMS 6514 and AMS 6521 (UNS K93160) MIL S 46850, MIL S 13881 Werkstoff Nr. 1.6358 and 1.6354 Also known as Type 300, Maraging 300, C300 Vdimor 300 Vascomax C300 Maraging 350 https://www.nickelalloys.in/maraging-350.htm https://www.nickelalloys.in/maraging-350.htm Mon, 21 Jan 2019 00:00:00 +0530 Maraging 350 is a nickel maraging steel which contains Cobalt as the primary strengthening agent. Maraging 350 has excellent mechanical properties, workability and heat treatment characteristics. Maraging 350 is used for missile and rocket motor cases, landing and takeoff gear components, high performance shafting, gears and fasteners. Specifications MIL-S-46850 AMS 6515 Trade name's: Maraging 350, Vascomax C350™ Hastelloy C22 https://www.nickelalloys.in/hastelloy-c22.htm https://www.nickelalloys.in/hastelloy-c22.htm Mon, 21 Jan 2019 00:00:00 +0530 Hastelloy Alloy C22 round bars UNS N06022 EN 2.4602 contain Carbon 0.15% max, Manganese 0.50% max, Silicon 0.8% max, Aluminium 0.2% which is commonly used in various daily applications such as Chemical processing, Pulp and paper processing, Oil and gas, Pesticide production, Pollution control, Sour gas services, Waste incinerators. Alloy C22 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C22 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C22 round bars along in types of Hastelloy Alloy C22 bright round bars, Hastelloy Alloy C22 hexagonal bars, Hastelloy Alloy C22 square bars, Hastelloy Alloy C22 hex bars, Hastelloy Alloy C22 flat bars, Hastelloy Alloy C22 threaded bars and Hastelloy Alloy C22 forged bars. All the Hastelloy Alloy C22 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C22 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Hastelloy Alloy C22 bars we stock: Hastelloy Alloy C22 cold drawn & polished round, hex, square, threaded, forged bars Hastelloy Alloy C22 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Hastelloy Alloy C22 peeled and turned round, hex, square, threaded, forged bars Hastelloy Alloy C22 buffed round, hex, square, threaded, forged bars Hastelloy Alloy C22 chamfered round, hex, square, threaded, forged bars Hastelloy Alloy C22 solution annealed round, hex, square, threaded, forged bars Hastelloy Alloy C22 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Hastelloy Alloy C22 round bars:Chemical processing, Pulp and paper processing, Oil and gas, Pesticide production, Pollution control, Sour gas services, Waste incinerators. Hastelloy 276 https://www.nickelalloys.in/hastelloy-276.htm https://www.nickelalloys.in/hastelloy-276.htm Mon, 21 Jan 2019 00:00:00 +0530 Hastelloy Alloy C276 round bars UNS N10276 EN 2.4819 contain Chromium 14.5-16.5%, Manganese 1.0% max, Carbon 0.01%, Silicon 0.8% maximum which is commonly used in various daily applications such as Almost anything used around sulphuric acid (heat exchangers, evaporators, filters, and mixers), Bleach plants and digesters for the, manufacturing of paper and pulp, Components used around sour gas, Marine engineering, Waste treatment, Pollution control. Alloy C276 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C276 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C276 round bars along in types of Hastelloy Alloy C276 bright round bars, Hastelloy Alloy C276 hexagonal bars, Hastelloy Alloy C276 square bars, Hastelloy Alloy C276 hex bars, Hastelloy Alloy C276 flat bars, Hastelloy Alloy C276 threaded bars and Hastelloy Alloy C276 forged bars. All the Hastelloy Alloy C276 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C276 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Hastelloy Alloy C276 bars we stock: Hastelloy Alloy C276 cold drawn & polished round, hex, square, threaded, forged bars Hastelloy Alloy C276 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Hastelloy Alloy C276 peeled and turned round, hex, square, threaded, forged bars Hastelloy Alloy C276 buffed round, hex, square, threaded, forged bars Hastelloy Alloy C276 chamfered round, hex, square, threaded, forged bars Hastelloy Alloy C276 solution annealed round, hex, square, threaded, forged bars Hastelloy Alloy C276 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Hastelloy Alloy C276 round bars:Almost anything used around sulphuric acid (heat exchangers, evaporators, filters, and mixers), Bleach plants and digesters for the, manufacturing of paper and pulp, Components used around sour gas, Marine engineering, Waste treatment, Pollution control. Hastelloy C2000 https://www.nickelalloys.in/hastelloy-c2000.htm https://www.nickelalloys.in/hastelloy-c2000.htm Mon, 21 Jan 2019 00:00:00 +0530 Hastelloy Alloy C2000 round bars UNS N06200 EN 2.4675 contain Chromium 23%, molybdenum 16%, Nickel Balance which is commonly used in various daily applications such as chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment. Alloy C2000 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy C2000 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy C2000 round bars along in types of Hastelloy Alloy C2000 bright round bars, Hastelloy Alloy C2000 hexagonal bars, Hastelloy Alloy C2000 square bars, Hastelloy Alloy C2000 hex bars, Hastelloy Alloy C2000 flat bars, Hastelloy Alloy C2000 threaded bars and Hastelloy Alloy C2000 forged bars. All the Hastelloy Alloy C2000 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy C2000 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Hastelloy Alloy C2000 bars we stock: Hastelloy Alloy C2000 cold drawn & polished round, hex, square, threaded, forged bars Hastelloy Alloy C2000 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Hastelloy Alloy C2000 peeled and turned round, hex, square, threaded, forged bars Hastelloy Alloy C2000 buffed round, hex, square, threaded, forged bars Hastelloy Alloy C2000 chamfered round, hex, square, threaded, forged bars Hastelloy Alloy C2000 solution annealed round, hex, square, threaded, forged bars Hastelloy Alloy C2000 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Hastelloy Alloy C2000 round bars:Chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment. Hastelloy X https://www.nickelalloys.in/hastelloy-x.htm https://www.nickelalloys.in/hastelloy-x.htm Mon, 21 Jan 2019 00:00:00 +0530 Hastelloy Alloy X round bars UNS N06002 EN 2.4665 contain Chromium 20.5-23.0%, Manganese 1.0% max, Carbon 0.05-0.15%, Silicon 0.1% max, Molybdenum 8-10% which is commonly used in various daily applications such as Gas turbine engines, Transition ducts ,Combustor cans, Spray bars and flame holders, Afterburners, tailpipes, and cabin heaters, Chemical processing retorts, muffles, and tubing. Alloy X in the annealed condition can be strengthened further by relatively low temperature heat treatment. Hastelloy Alloy X bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Hastelloy Alloy X round bars along in types of Hastelloy Alloy X bright round bars, Hastelloy Alloy X hexagonal bars, Hastelloy Alloy X square bars, Hastelloy Alloy X hex bars, Hastelloy Alloy X flat bars, Hastelloy Alloy X threaded bars and Hastelloy Alloy X forged bars. All the Hastelloy Alloy X bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hastelloy Alloy X rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Hastelloy Alloy X bars we stock: Hastelloy Alloy X cold drawn & polished round, hex, square, threaded, forged bars Hastelloy Alloy X cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Hastelloy Alloy X peeled and turned round, hex, square, threaded, forged bars Hastelloy Alloy X buffed round, hex, square, threaded, forged bars Hastelloy Alloy X chamfered round, hex, square, threaded, forged bars Hastelloy Alloy X solution annealed round, hex, square, threaded, forged bars Hastelloy Alloy X forged round, hex, square, threaded forged bars with annealed and aged condition Application of Hastelloy Alloy X round bars:Gas turbine engines, Transition ducts ,Combustor cans, Spray bars and flame holders, Afterburners, tailpipes, and cabin heaters, Chemical processing retorts, muffles, and tubing. Monel 400 https://www.nickelalloys.in/monel-400.htm https://www.nickelalloys.in/monel-400.htm Mon, 21 Jan 2019 00:00:00 +0530 Monel Alloy 400 round bars UNS N04400 EN 2.4360 contain Copper 28-34%, Manganese 2.0% max, Nickel 63%, Silicon 0.5% which is commonly used in various daily applications such as Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs. Alloy 400 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy 400 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy 400 round bars along in types of Monel Alloy 400 bright round bars, Monel Alloy 400 hexagonal bars, Monel Alloy 400 square bars, Monel Alloy 400 hex bars, Monel Alloy 400 flat bars, Monel Alloy 400 threaded bars and Monel Alloy 400 forged bars. All the Monel Alloy 400 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Monel Alloy 400 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Monel Alloy 400 bars we stock: Monel Alloy 400 cold drawn & polished round, hex, square, threaded, forged bars Monel Alloy 400 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Monel Alloy 400 peeled and turned round, hex, square, threaded, forged bars Monel Alloy 400 buffed round, hex, square, threaded, forged bars Monel Alloy 400 chamfered round, hex, square, threaded, forged bars Monel Alloy 400 solution annealed round, hex, square, threaded, forged bars Monel Alloy 400 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Monel Alloy 400 round bars:Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs.. Custom 455 https://www.nickelalloys.in/custom-455.htm https://www.nickelalloys.in/custom-455.htm Mon, 21 Jan 2019 00:00:00 +0530 Custom Alloy 455 round bars UNS S45500 AMS 5617 contain Copper 1.50-2.50%, Manganese 0.50% max, Nickel 7.50-9.50%, Silicon 0.5% max which is commonly used in various daily applications such as Medical devices and instrument, needles, pins. Alloy 455 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Custom Alloy 455 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Custom Alloy 455 round bars along in types of Custom Alloy 455 bright round bars, Custom Alloy 455 hexagonal bars, Custom Alloy 455 square bars, Custom Alloy 455 hex bars, Custom Alloy 455 flat bars, Custom Alloy 455 threaded bars and Custom Alloy 455 forged bars. All the Custom Alloy 455 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Custom Alloy 455 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Custom Alloy 455 bars we stock: Custom Alloy 455 cold drawn & polished round, hex, square, threaded, forged bars Custom Alloy 455 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Custom Alloy 455 peeled and turned round, hex, square, threaded, forged bars Custom Alloy 455 buffed round, hex, square, threaded, forged bars Custom Alloy 455 chamfered round, hex, square, threaded, forged bars Custom Alloy 455 solution annealed round, hex, square, threaded, forged bars Custom Alloy 455 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Custom Alloy 455 round bars:Chemical and allied industries, Food and dye production, Heat exchangers, Explosives, Tanks, Valves, Pickling racks, Manufacture of synthetic rubber and plastics, Pharmaceutica Aluminum Alloy 2014 https://www.nickelalloys.in/aluminum-alloy-2014.htm https://www.nickelalloys.in/aluminum-alloy-2014.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminium Aluminium Alloy 201414 round bars UNS A92014 Wr No. 3.1255 contain Copper 3.90-5.00%, Manganese 0.40-1.20%, Nickel 0.00-0.10%, Silicon 0.50-0.90% which is commonly used in various daily applications such as military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.). Weapons manufacture, structural applications. Aluminium Aluminium Alloy 201414 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Aluminium Aluminium Alloy 201414 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Aluminium Aluminium Alloy 201414 round bars along in types of Aluminium Aluminium Alloy 201414 bright round bars, Aluminium Aluminium Alloy 201414 hexagonal bars, Aluminium Aluminium Alloy 201414 square bars, Aluminium Aluminium Alloy 201414 hex bars, Aluminium Aluminium Alloy 201414 flat bars, Aluminium Aluminium Alloy 201414 threaded bars and Aluminium Aluminium Alloy 201414 forged bars. All the Aluminium Aluminium Alloy 201414 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Aluminium Aluminium Alloy 201414 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Aluminium Alloy 2014 bars we stock: Aluminium Alloy 2014 cold drawn & polished round, hex, square, threaded, forged bars Aluminium Alloy 2014 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Aluminium Alloy 2014 peeled and turned round, hex, square, threaded, forged bars Aluminium Alloy 2014 buffed round, hex, square, threaded, forged bars Aluminium Alloy 2014 chamfered round, hex, square, threaded, forged bars Aluminium Alloy 2014 solution annealed round, hex, square, threaded, forged bars Aluminium Alloy 2014 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Aluminium Alloy 2014 round bars:Military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.) Aluminum Alloy 2017 https://www.nickelalloys.in/aluminum-alloy-2017.htm https://www.nickelalloys.in/aluminum-alloy-2017.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminium Aluminium Alloy 201714 round bars UNS A92017 WR NO. 3.1325 contain Copper 3.90-5.00%, Manganese 0.40-1.20%, Nickel 0.00-0.10%, Silicon 0.50-0.90% which is commonly used in various daily applications such as military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.). Weapons manufacture, structural applications. Aluminium Aluminium Alloy 201714 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Aluminium Aluminium Alloy 201714 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Aluminium Aluminium Alloy 201714 round bars along in types of Aluminium Aluminium Alloy 201714 bright round bars, Aluminium Aluminium Alloy 201714 hexagonal bars, Aluminium Aluminium Alloy 201714 square bars, Aluminium Aluminium Alloy 201714 hex bars, Aluminium Aluminium Alloy 201714 flat bars, Aluminium Aluminium Alloy 201714 threaded bars and Aluminium Aluminium Alloy 201714 forged bars. All the Aluminium Aluminium Alloy 201714 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Aluminium Aluminium Alloy 201714 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Aluminium Alloy 2017 bars we stock: Aluminium Alloy 2017 cold drawn & polished round, hex, square, threaded, forged bars Aluminium Alloy 2017 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Aluminium Alloy 2017 peeled and turned round, hex, square, threaded, forged bars Aluminium Alloy 2017 buffed round, hex, square, threaded, forged bars Aluminium Alloy 2017 chamfered round, hex, square, threaded, forged bars Aluminium Alloy 2017 solution annealed round, hex, square, threaded, forged bars Aluminium Alloy 2017 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Aluminium Alloy 2017 round bars:Manufacture of screw machine products and fittings, pulleys, gauges, coat hangers, and in crochet and knitting needles. Aluminum Alloy 5052 https://www.nickelalloys.in/aluminum-alloy-5052.htm https://www.nickelalloys.in/aluminum-alloy-5052.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminum 5052 is one of the higher strength non-heat treatable alloys (Annealed it is stronger than 1100 and 3003). Alloy 5052 has excellent characteristics with a high fatigue strength it is used for structures which are subject to excessive vibrations. As 5052 also has excellent corrosion resistance, especially in marine atmospheres and is therefore commonly used in boats, marine components, fuel and oil tubing. Specifications 5052 -0 AMS 4015J Sheet, Plate, Foil AMS 4069C Tube AMS 4070K Tube AMS 4071 Hydraulic Tube UNS A95052 QQ-A-250/8 5052 H-32 AMS 4016J UNS A95052 QQ-A-250/8 5052 H34 AMS 4017J QQ-A-250/8 Aluminum Alloy 5083 https://www.nickelalloys.in/aluminum-alloy-5083.htm https://www.nickelalloys.in/aluminum-alloy-5083.htm Wed, 23 Jan 2019 00:00:00 +0530 Alloy 5083 is available in Plate, Sheet, Strip, Forging Stock, Tube and Bar. Alloy 5083 tube is available in many sizes from stock, however there is a minimum production of 30m.Specifications BS N8 Alcan GB-B54S Alcoa-505 BA 281 Hiduminium-05 Peraluman-460 Birmabright-BB4 QQ-A-200/4 QQ-A-250/6 Aluminum Alloy 6061 https://www.nickelalloys.in/aluminum-alloy-6061.htm https://www.nickelalloys.in/aluminum-alloy-6061.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminium Alloy 6061 Sheet, Plate, Wire, Rod, Bar, Tube and extrusions. 6061 Foil (Shim) is available in various thicknessesAluminum 6061 is an extremely versatile heat treatable aluminum alloy. 6061 has a wide range of mechanical and corrosion resistance properties as well as having most of the good qualities of aluminum. 6061 is used in a many applications from aircraft structures, yacht construction, truck bodies, bicycle frames to screw machine parts. Specifications BS L117 Alloy 6061 Tube Drawn T6 BS L118 Alloy 6061 Tube Drawn T6 Hydraulically Tested H20 HE20 6061 Extrusions HP20 6061 Plate HS20 6061 Sheet AMS 4009 6061-0 Foil AMS 4021 6061-0 Alclad Sheet and Plate AMS 4022 6061 Alclad Sheet and Plate Cancelled AMS 4023 6061 Alclad Sheet and Plate Cancelled AMS 4025 6061-0 Sheet and Plate AMS 4026 6061-T4 Sheet T451 Plate AMS 4027 6061-T6 Sheet and T651 Plate AMS 4053 6061 Cancelled AMS 4079 6061-0 Tube Drawn Seamless Close Tolerence AMS 4080 6061-0 Tube Drawn Seamless AMS 4081 6081-T4 Tube Drawn Seamless Hydraulic AMS 4082 6061-T6 Tube Drawn Seamless AMS 4083 6061-T6 Tube Drawn Seamless Hydraulic AMS 4091 Superseded by AMS 4081 AMS 4092 Superseded by AMS 4082 AMS 4093 Superseded by AMS 4083 AMS 4113 6061-T6 Extruded shapes AMS 4115 6061-0 Cold finished bars, rod, wire AMS 4116 6061-T4 Cold finished bars, rod, wire AMS 4117 6061-T6/T651 Cold finished bars, rod, wire AMS 4127 6061-T6 Forgings Rolled or Forged AMS 4128 6061-T451 Bars Rolled or Forged AMS 4129 6061-T651 Superseded by 4117 AMS 4146 6061-T4 Forgings AMS 4150 6061-T6 Extrusions and Rings AMS 4160 6061-0 Extrusion AMS 4161 6061-T4 Extrusion AMS 4172 6061-T4511 Extrusion AMS 4173 6061-T6511 Extrusion QQ-A-200/8 6061-T6/T6511 Extruded bar, tube, section QQ-A-200/16 6061-T6 extruded stuctural shapes QQ-A-225/8 6061-T6 / T651 Cold finished bar, tube, section QQ-A-250/11 6061 Sheet and Plate WW-T-700/6 6061-T6 Seamless, drawn tube MIL-T-7081 6061-T6 Hydraulic tube QQ-A-367 6061 Forgings Werkstoff 3.3211 Werkstoff 3.3214 EN 2392 6061-T6 Tube EN 2694 6061-T6 Sheet, strip EN 3341 6061-T4 Sheet, strip EN 3342 6061-T4 Extruded bar EN 3557 EN 4213 6061-T651 Plate AWCO-22 Birmetal-016 BA22 Duricilium-Q Hiduminium-43 LA 380 ABM 2-3023 ABM 2-3025 ABM 2-3026 ABS 5144 ABS 5151 BACM 123 BACM 171 6061-0 Tube A-GSUC L-3453 ASN-A-3277 NCT 15-238-01 AIR 9048.210 6061-0 Sheet AIR 9048.220 6061-T4 Sheet AIR 9048.230 6061-0 Sheet AIR 9048.240 6061-T6 Sheet AIR 9049 Aluminum Alloy 7075 https://www.nickelalloys.in/aluminum-alloy-7075.htm https://www.nickelalloys.in/aluminum-alloy-7075.htm Wed, 23 Jan 2019 00:00:00 +0530 Aluminium Alloy 7075 is available in Bar, Sheet, Plate, Strip, Forging Stock and Tube. View stock list for further information, Sheet Stock, PlateSpecifications BS 2 L95 Alloy 7075-T651 Plate BS 2 L88 Alloy 7075-T6 Clad Sheet and Strip BS L160 Alloy 7075-T73511 Bars and Sections BS L161 Alloy 7075 Forging Stock and Forgings BS L162 Alloy 7075 Forging Stock and Forgings BS L170 Alloy 7075-T6511 Bars and Sections DTD 5110 7075 Clad Plate DTD 5124 7075 Bars and Sections AMS 4038 7075-T651 Superseded by AMS 4045 AMS 4039 7075-T651 Superseded by AMS 4049 AMS 4044 7075 -0 Sheet and Plate AMS 4045 7075-T6 Sheet and T651 Plate AMS 4046 7075-T6 Alclad one side Sheet, T651 Plate AMS 4048 7075-T0 Alclad Sheet and Plate AMS 4049 7075 -T6 Alclad Sheet and T651 Plate AMS 4078 7075-T351 Plate AMS 4122 7075-T6 Cold finished rod, bar, wire AMS 4123 7075-T651 Cold finished bar, rod AMS 4124 7075-T7351 Cold finished bar, rod, wire AMS 4126 7075-T6 Forgings AMS 4131 7075-T74 Forgings AMS 4139 7075 Forgings (Non-Current) AMS 4141 7075-T73 Die Forgings AMS 4147 7075-T7352 Forgings AMS 4154 7075-T6 Extrusions AMS 4166 7075-T73 Extusion AMS 4167 7075-T73511 Extrusions AMS 4168 7075-T6511 Extrusions Unstraightened AMS 4169 7075-T6511 Extrusions Straightened AMS 4174 7075-T73 Flash Welded Rings AMS 4186 7075-TF Cold finished bar, rod, wire AMS 4187 7075-0 Cold finished bar, rod, wire QQ-A-250/13 7075-0 Alclad sheet and plate QQ-A-250/13 7075-T6 Alclad sheet and plate QQ-A-250/18 7075-0 Clad one side, sheet and plate QQ-A-250/18 7075-T6 Clad one side, sheet and plate QQ-A-250/24 7075-T7651 Plate QQ-A-250/25 7075 Sheet, clad with7072-T76 QQ-A-250/26 7075 Sheet, clad with7011-T76 QQ-A-367 Alloy 7075-T6 Forgings MIL-A-22771 AIR 9048.690 7075-T7351 Plate AIR 9048.700 7075-T7351 Plate AIR 9048.710 7075-T7351 Plate AIR 9049 Grade 1 https://www.nickelalloys.in/grade-1.htm https://www.nickelalloys.in/grade-1.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium Grade 1 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.Specifications : AMS 4940 - Sheet, strip, plate MIL-T-9046J CP4 - Sheet, strip, plate AMS-T-9046B CP4 - Sheet, strip, plate ASTM B265 - Gr1 Sheet, plate ASTM B337 - Gr1 Pipe (withdrawn) ASTM B338 - Gr1 heat exchanger tube ASTM B348 - Gr1 bar ASTM B367 - Gr1 castings ASTM B381 - Gr1 forgings ASTM F67 - Gr1 Surgical Implant ASTM F467 - Gr1 nuts ASTM F468 - Gr1 bolts UNS R50250 DTD 5013 AIR 9182 T35 Werkstoff WS3.7024 (aerospace) Werkstoff WS3.7025 LN 9297 IMI 115 AICMA Ti-P01 DIN 17850 (chemistry) DIN 17860 (sheet, plate) DIN 17862 (bar) DIN 17863 (wire) DIN 17864 (forgings) Grade 2 https://www.nickelalloys.in/grade-2.htm https://www.nickelalloys.in/grade-2.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium Grade 2 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.Specifications AMS 4902F - Sheet, strip and plate (annealed) AMS 4941C - Tubing, welded (annealed) AMS 4942C - Tubing, seamless (annealed) AMS 4951F - Welding wire, commercially pure MIL-T-9046 (TYPE 1 COMP A) CP3 BS 3TA1 - Sheet, strip BS 2TA2 - Sheet, strip BS 3TA3 - Bar (obsolete) BS 2TA4 - Forgings (obsolete) BS 2TA5 - Forgings (obsolete) ASTM B265 Gr2 - Sheet, plate ASTM B337 Gr2 - Pipe (withdrawn) ASTM B338 Gr2 - Heat exchange tube ASTM B348 Gr2 - Bar ASTM B367 Gr2 - Castings ASTM B381 Gr2 - Forgings ASTM F67 Gr2 - Surgical Implant ASTM F467 Gr2 - Nuts ASTM F468 Gr2 - Bolts UNS R50400 DTD 5073 AIR 9182 T40 Werkstoff 3.7034 (Aerospace) Werkstoff 3.7035 LN 9297 DIN 17850,17860, 17862, 17863 and 17864 IMI 125 AICMA Ti-P 02 AIMS 08 -18- 002 ABS 5012 Grade 5 https://www.nickelalloys.in/grade-5.htm https://www.nickelalloys.in/grade-5.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium Grade 5 round bars UNS R56400 WR NO 3.7165 contain Aluminium 5.5-6.75 % max, Iron 0.40% max which is commonly used in various daily applications such as Aerospace, Surgical Implants, Jewellery, Chemical, Springs, Bolts. Titanium Gr 5 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Titanium Grade 5 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Titanium Grade 5 round bars along in types of Titanium Grade 5 bright round bars, Titanium Grade 5 hexagonal bars, Titanium Grade 5 square bars, Titanium Grade 5 hex bars, Titanium Grade 5 flat bars, Titanium Grade 5 threaded bars and Titanium Grade 5 forged bars. All the Titanium Grade 5 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Titanium Grade 5 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Titanium Grade 5 bars we stock: Titanium Grade 5 cold drawn & polished round, hex, square, threaded, forged bars Titanium Grade 5 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Titanium Grade 5 peeled and turned round, hex, square, threaded, forged bars Titanium Grade 5 buffed round, hex, square, threaded, forged bars Titanium Grade 5 chamfered round, hex, square, threaded, forged bars Titanium Grade 5 solution annealed round, hex, square, threaded, forged bars Titanium Grade 5 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Titanium Grade 5 round bars:Aerospace, Surgical Implants, Jewellery, Chemical, springs, bolts. Grade 7 https://www.nickelalloys.in/grade-7.htm https://www.nickelalloys.in/grade-7.htm Mon, 21 Jan 2019 00:00:00 +0530 Titanium Grade 7 round bars UNS R52400 contain Carbon 0.1 % max, Palladium 0.25 - 0.12 %, Oxygen 0.25 % max, which is commonly used in various daily applications such as Chemical Processing, Desalination, Power generation. Titanium Gr 7 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Titanium Grade 7 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Titanium Grade 7 round bars along in types of Titanium Grade 7 bright round bars, Titanium Grade 7 hexagonal bars, Titanium Grade 7 square bars, Titanium Grade 7 hex bars, Titanium Grade 7 flat bars, Titanium Grade 7 threaded bars and Titanium Grade 7 forged bars. All the Titanium Grade 7 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Titanium Grade 7 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Types of Titanium Grade 7 bars we stock: Titanium Grade 7 cold drawn & polished round, hex, square, threaded, forged bars Titanium Grade 7 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars Titanium Grade 7 peeled and turned round, hex, square, threaded, forged bars Titanium Grade 7 buffed round, hex, square, threaded, forged bars Titanium Grade 7 chamfered round, hex, square, threaded, forged bars Titanium Grade 7 solution annealed round, hex, square, threaded, forged bars Titanium Grade 7 forged round, hex, square, threaded forged bars with annealed and aged condition Application of Titanium Grade 7 round bars:Chemical Processing, Desalination, Power generation. Stainless Steel 301 https://www.nickelalloys.in/stainless-steel-301.htm https://www.nickelalloys.in/stainless-steel-301.htm Fri, 18 Jan 2019 00:00:00 +0530 Stainless steel 301 strips UNS S30100 WR. NO 1.4310 contain 6-8% nickel 0.75% copper. Stainless steel 301 grades may also be used in automotive trim, kitchen equipment, hose clamps, wheel covers, aircraft components and a wide variety of industrial applications. Stainless steel 301 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Stainless steel 301 round bars along in types of stainless steel 301 bright round bars, Stainless steel 301 hexagonal bars, stainless steel 301 square bars, stainless steel 301 hex bars, stainless steel 301 flat bars, stainless steel 301 threaded bars and stainless steel 301 forged bars. All the stainless steel 301 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export stainless steel 301 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Harsh steel Export and Supply Stainless steel 301 strips capabilities include: Stainless steel 301 strips Annealed & Precision Stainless steel 301 strips thickness-0.1mm to 6.00mm Stainless steel 301 strips width-2.5mm to 1320mm (slit to close tolerances) Harsh steel provides Stainless steel 301 Cold rolled mill finish strips such as: Stainless steel 301 strips 2D - cold rolled, heat treated, pickled. Stainless steel 301 strips 2B - cold rolled, heat treated, pickled, skin passed on bright rolls. Stainless steel 301 strips 2R(BA) - cold rolled, bright annealed Stainless steel 301 strips HR - hot rolled, annealed Stainless Steel 301 Strip Applications: High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include: aircraft structural parts trailer bodies utensils architectural and automotive rim roof drainage products conveyor belts variety of industrial applications Stainless Steel 301 Strip Corrosion Resistance: Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures. Resists outdoor, industrial, marine, and mild chemical environments susceptible to carbide precipitation during welding, which restricts its use in some applications Similar to resistance of Stainless Steel grade 304 Stainless Steel 301 Strip Heat Resistance: Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C). Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C). Stainless Steel 301 Strip Heat Treatment: Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly. Use low side of range for intermediate annealing. This grade cannot be hardened by thermal treatment. Stainless Steel 301 Strip Cold Working: hardens at high rate, creating a very high strength from cold rolling and from roll forming. more difficult to work than other austenitic stainless steels, due to its high work hardening rate.. strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process. severe cold deformation can still occur, due to residual ductility. Grade 301 becomes strongly magnetic when cold rolled. Stainless Steel 301 Strip Welding: must be annealed for maximum corrosion resistance more difficult to work than other austenitic stainless steels, due to its high work hardening rate.. must be annealed for maximum corrosion resistance Welding and post weld annealing will both remove high strength induced by prior cold rolling. Spot welding is commonly used to assemble cold rolled 301 components.. material will lose temper in the heat affected weld zone. Stainless Steel coils available in following grades : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201Nickel Alloy coils available in following grades : such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth. Duplex & Super Duplex coils available in following grades : S31803, S32750, S32760, S31500, S32205. Stainless Steel 304/304L https://www.nickelalloys.in/stainless-steel-304-304l.htm https://www.nickelalloys.in/stainless-steel-304-304l.htm Fri, 18 Jan 2019 00:00:00 +0530 304 is available in Sheet, Strip, Plate, Tube, Bar (Round), Rod, Rings, Forgings.Type 304 is a variation of the basic 18-8 grade, Type 304, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In many instances, it can be used in the ”as-welded“ condition, while Type 304 must be annealed in order to retain adequate corrosion resistance. Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the ”as-welded“ condition, even in severe corrosive conditions. It often eliminates the necessity of annealing weldments except for applications specifying stress relief. It has slightly lower mechanical properties than Type 304.Specifications : Types 304 Stainless Steel and 304L Stainless Steel are covered by the following specifications: Type 304 L Vac Melt (AMS 5647, QQ-S-763, ASME SA 479, ASTM A 276, ASTM A 479, ASTM A 484) AMS 5501 Sheet / strip 125ksi AMS 5511 Sheet /strip (ann) AMS 5513 Sheet / strip (ann) AMS 5560 Seamless tube AMS 5563 1/4Hd seamless/welded AMS 5564 1/8Hd seamless/welded AMS 5565 Welded tube AMS 5566 Seamless/welded tube AMS 5567 Seamless/welded tube AMS 5569 Seamless/ welded tube AMS 5575 Welded tube AMS 5639 Bar / Forgings (304) AMS 5647 Bar / Forgings (304L) MIL-T-8506 Seamless /welded tube MIL-T-5695 Seamless / welded tube MIL-T-6845 Seamless / welded MIL-T-8504 Seamless/welded tube MIL-T-6737 Welded tube QQ-S-763 ASTM A276 / ASME SA276 ASTM A479 / ASME SA479 ASTM A484 / ASME SA484 BS 970; 304S31 / 304S12 Werkstoff 1.4306 AFNOR Z2CN18-10 UNS S30400 UNS S30403 Stainless Steel 316/316L https://www.nickelalloys.in/stainless-steel-316-316l.htm https://www.nickelalloys.in/stainless-steel-316-316l.htm Fri, 18 Jan 2019 00:00:00 +0530 Type 316 and 316L is available in Sheet, Strip, Plate, Angles, Tube, Bar (Hexagon, Round, Flat, Square), Forging Stock, Welding Wire. 316 Foil (Shim) is available in various thicknesses.Type 316 is an austenitic chromium nickel stainless steel. It also contains molybdenum which increases its general corrosion resistance as well as the mechanical properties at elevated temperatures. The properties of type 316 are similar to type 304, however 316 is stronger at elevated temperatures amd also corrosion resistance is improved particularly against sulphates, phosphates and other salts as well as reducing acids such as sulphuric, sulphurous and phosphoric. Type 316L is an extra low carbon version of type 316.Specifications AMS 5507 Sheet / strip/ plate (316L) AMS 5524 Sheet / strip / plate (316) AMS 5573 Seamless tube AMS 5584 Seamless/welded tube AMS 5648 Bar / wire / forging (316) AMS 5649 Bar / wire / forging (FM) AMS 5653 Bar / wire / forging (316L) QQ-S-763 AMS-S-7720 MIL-S-5059 MIL-S-7720 ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A666 ASTM A276 / ASME SA276 ASTM A479 / ASME A479 ASTM A484 / ASME SA484 ASTM F138 ASTM A320 Grd B8M ASTM A193 Grd B8M Cl1 BS 970; 316S31 / 316S12 EN 58J Werkstoff 1.4401 Werkstoff 1.4404 Werkstoff 1.4427 Werkstoff 1.4435 Werkstoff 1.4441 Werkstoff 1.4571 AFNOR Z6CND17-11 AFNOR Z2CND17-12 UNS S31600 UNS S31603 316 316 Tube 316L 316LVM (Vac Melt) 316Ti For 316, 316L and 316Ti Tubes Copper Nickel 70/30 https://www.nickelalloys.in/copper-nickel-70-30.htm https://www.nickelalloys.in/copper-nickel-70-30.htm Mon, 21 Jan 2019 00:00:00 +0530 Cupro Nickel 70-30 round bars UNS C71500 Wr No. 2.0872 contain Manganese 1.0% max, Nickel 30%, Iron 0.7% which is commonly used in various daily applications such as Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls. Cupro Nickel 70-30 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 70-30 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 70-30 round bars along in types of Cupro Nickel 70-30 bright round bars, Cupro Nickel 70-30 hexagonal bars, Cupro Nickel 70-30 square bars, Cupro Nickel 70-30 hex bars, Cupro Nickel 70-30 flat bars, Cupro Nickel 70-30 threaded bars and Cupro Nickel 70-30 forged bars. All the Cupro Nickel 70-30 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 70-30 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.   Cupro Nickel 70-30 round bars: Thickness of Cupro Nickel 70-30 bars- 3mm up to 600mm Length of Cupro Nickel 70-30 bars– 2mm to 6000mm Tolerance of Cupro Nickel 70-30 bars - h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Application of Cupro Nickel 70-30 round bars:Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls.