917666559665 917666559665
Harsh Steel

Stainless Steel Products

  • Stainless Steel 309

    Stainless Steel 309

    Carbon (C) : 0.20 max%

    Chromium (Cr) : 22.00 - 24.00%

    Manganese (Mn) : 2.00 max%

    Silicon (Si) : 0.75 max%

    Phosphorous (P) : 0.45 max%

  • Stainless Steel 310

    Stainless Steel 310

    Stainless Steel 310 (AMS 5521 / AMS 5651) UNS S31000/S31008 Werkstoff 1.4842/1.4845:
    Alloy 310 is a austenitic chromium-nickel stainless steel. Alloy 310 is used where good corrosion and heat resistance are required. Alloy

  • Stainless Steel 316 Ti

    Stainless Steel 316 Ti

    Carbon (C) : 0.03 max%

    Chromium (Cr) : 16.00 - 18.00%

    Manganese (Mn) : 2.00 max%

    Silicon (Si) : 0.75 max%

    Phosphorous (P) : 0.04 max%

  • Stainless Steel 321

    Stainless Steel 321

    Condition : Alloy 321 Tube

    Tensile Strength Rm, N/mm² : 500-730

    Yield Strength Rp 0.2, N/mm² : 200

    Elongation % : 35

  • Stainless Steel 330

    Stainless Steel 330

    Material : Alloy 330 Annealed

    Ultimate Tensile Strength (ksi) : 70

    Yield Strength (ksi) 0.2 % : 25

    Elongation in 2 : 30

    Rockwell B Hardness : ≤95

  • Stainless Steel 347

    Stainless Steel 347

    Stainless Steel 347 (AMS 5512/AMS 5646) UNS S30347 Werkstoff 1.4544/1.4546/1.4550 :
    Alloy 347 is a chromium nickel stainless steel which has been modified by the addition of columbium and tantalum. The main advantage of this

  • Stainless Steel 410

    Stainless Steel 410

    Stainless Steel 410 (AMS 5504) UNS S41000:
    Type 410 is a basic hardenable martensitic stainless steel and is well suited for use in highly stressed parts where properties such as corrosion resistance, good strength and

  • Stainless Steel 904L

    Stainless Steel 904L

    Alloy : Alloy 904L Tube

    Tensile Strength MPa : 500-700

    Yield Strength (0.2% Offset) MPa : 200

    Elongation (%) : 40

    Grade : 904L

  • Stainless Steel 301

    Stainless Steel 301

    Material : Use Of The Finest Grade Raw Material.

    Stainless Steel 301 Coils Thickness Range : 0.025mm – 4.00mm

    Stainless Steel 301 Coils Width : Soft, Half Hard, Half Hard, ¾ Hard, Full Hard & Spring Hard

    Stainless Steel 301 Coils Hardness : Minimum 3.2mm to Maximum 2000mm

    Stainless Steel 301 Coils Finish : 2b, 2d, Bright Annealed, #3 Polish, #4 Polish and More

  • Stainless Steel 304/304L

    Stainless Steel 304/304L

    304 is available in Sheet, Strip, Plate, Tube, Bar (Round), Rod, Rings, Forgings.

    Type 304 is a variation of the basic 18-8 grade, Type 304, with a higher chromium and lower carbon content. Lower carbon minimizes chromium carbide

  • Stainless Steel 420

    Stainless Steel 420

    Material ` : Alloy 420 Ann, Room Temp 1

    Tensile Strength (Mpa) : 655

    Proof Stress 0.2% (MPa) : 345

    Elongation in 2 : 25

    Reduction of Area % : 55

  • Stainless Steel 430

    Stainless Steel 430

    Material : Alloy 430 Annealed Sheet

    Condition : Annealed (AMS 5503)

    Tensile Strength (ksi) : 65

    Proof Stress 0.2% (ksi) : 35

    Elongation A5% : 20-22


Pages: 1   2   Next »

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Bhuleshwar, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665



Looking for Product Name ?