Stainless Steel 410

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Stainless Steel 410 (AMS 5504) UNS S41000:
Type 410 is a basic hardenable martensitic stainless steel and is well suited for use in highly stressed parts where properties such as corrosion resistance, good strength and ductility are required. 410 is used for steam / gas turbine blades and buckets, bushings, valve components, fasteners, nuclear reactor control rod mechanisms, petrochemical equipment and machine parts.

Resisitance to oxidation and corrosion - Alloy 410 exhibits good corrosion resistance to atmospheric corrosion, potable water, food acids and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects the surfaces from further attack.

Specifications ;
Type 410 Stainless Steel is covered by the following specifications:

  • AMS 5504 Sheet / strip / plate
  • AMS 5505 Sheet / strip / plate (Mod)
  • AMS 5591 Seamless tube
  • AMS 5609 Bars / wire
  • AMS 5611 Bars / wire / forging
  • AMS 5612 (51410 Modified) Bar, Wire, Forgings, Tubing and Rings
  • AMS 5613 Bars / wire / forging
  • AMS 5614 Bars / wire / forging
  • QQ-S-763, QQ-S-766
  • ASTM A176 / ASME SA176
  • ASTM A240 / ASME SA240
  • ASTM A276 / ASME SA276
  • ASTM A479 / ASME A479
  • ASTM A493 / ASME SA493
  • ASTM A580 / ASME SA580
  • ASTM F899, UNS S41000


Stainless Steel 410 (AMS 5504) UNS S41000

Grade US Aerospace/Military US Commercial Other
410410 Mod AMS 5504 Sheet / strip / plate
AMS 5505 Sheet / strip / plate (Mod)
AMS 5591 Seamless tube
AMS 5609 Bars / wire
AMS 5611 Bars / wire / forging
AMS 5612 Bars / wire / forging
AMS 5613 Bars / wire / forging
AMS 5614 Bars / wire / forging
QQ-S-763, QQ-S-766
ASTM A176 / ASME SA176
ASTM A240 / ASME SA240
ASTM A276 / ASME SA276
ASTM A479 / ASME A479
ASTM A493 / ASME SA493
ASTM A580 / ASME SA580
ASTM F899
UNS S41000

Technical Data Sheet

Chemical Composition Limits
Weight % C Si Mn P S Cr Fe
Alloy 410 0.15 max 1.0 max 1.0 max 0.040 max 0.030 max 11.5-13.5 Bal

Typical Mechanical Properties

Material Tempering Temp °C (°F) 0.2 % Yield Strength (Mpa) Ultimate Tensile Strength (Mpa) % Elongation in 2" % Reduction of Area Charpy V Notch Impact Strength (J) Hardness Brinell
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
260 (500) 1089 1331 17 62 76 401
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
317 (700) 1069 1296 17 60 66 401
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
482 (900) 1014 1303 18 58 38 401
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
538 (1000) 917 965 19 62 33 285
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
593 (1100) 724 827 20 63 52 248
Alloy 410 Bar
Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs
649 (1200) 634 731 21 65 119 223



Looking for Product Name ?