Monel 400

Contact Us

Harsh Steel

Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Mumbai, Maharashtra - 400004, India

Mobile : +91-7666559665

Call Us : 08048066374




Monel Alloy 400 round bars UNS N04400 EN 2.4360 contain Copper 28-34%, Manganese 2.0% max, Nickel 63%, Silicon 0.5% which is commonly used in various daily applications such as Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs. Alloy 400 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy 400 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy 400 round bars along in types of Monel Alloy 400 bright round bars, Monel Alloy 400 hexagonal bars, Monel Alloy 400 square bars, Monel Alloy 400 hex bars, Monel Alloy 400 flat bars, Monel Alloy 400 threaded bars and Monel Alloy 400 forged bars. All the Monel Alloy 400 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Monel Alloy 400 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

 

Types of Monel Alloy 400 bars we stock:

  • Monel Alloy 400 cold drawn & polished round, hex, square, threaded, forged bars
  • Monel Alloy 400 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
  • Monel Alloy 400 peeled and turned round, hex, square, threaded, forged bars
  • Monel Alloy 400 buffed round, hex, square, threaded, forged bars
  • Monel Alloy 400 chamfered round, hex, square, threaded, forged bars
  • Monel Alloy 400 solution annealed round, hex, square, threaded, forged bars
  • Monel Alloy 400 forged round, hex, square, threaded forged bars with annealed and aged condition


Application of Monel Alloy 400 round bars:
Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs..


Specifications

Thickness of Monel Alloy 400 Bars 3mm Up to 600mm
Length of Monel Alloy 400 Bars 2mm to 6000mm
Tolerance of Monel Alloy 400 Bars H8, H9, H10, H11, K12, Din 1013, A484, Grit 240 & 320
Carbon (C) 0.3 max%
Manganese (Mn) 2.0 max%
Silicon (Si) 0.5 max%
Nickel (Ni) 63.0 min%
Sulfur (S) 0.024 max%
Copper (Cu) 28-34 max%
Iron (Fe) 2.5 max%




Looking for Product Name ?